On Oct 11, 11:03 pm, husterk <hust...@gmail.com> wrote:
> On Oct 11, 12:44 pm, addy <adhicall...@gmail.com> wrote:
>
> > i am doing my final term project with this microcontroller , which is
> > to interface this microcontroller with ethernet to take information
> > from the server to authenticate the user depending upon the
> > information entered by the user .....
> > i want to know what all networking elements will be required to to
> > interface this microcontroller with ethernet ...
>
> > any information given can be very vital thanks for the help in my
> > cause..
>
> There are a couple ways to do this. The easiest way would be to
> purchase a serial to ethernet gateway device and interface the
> microcontroller to the gateway via thee serial port. Otherwise, you
> will need to create the circuitry to interface to a MAC (Media Access
> Controller) which will interface to a PHY (Physical Layer Controller)
> via the MII (Media Independent Interface). The PHY will then need to
> interface to a set of Ethernet Magnetics which will connect to the
> standard Ethernet RJ45 connector. I have implemented a system like
> this before and it is a lot of work. I would suggest you take a look
> at Lantronix (see link below) and the products that they have to
> offer.
>
> http://www.lantronix.com
>
> Keithhttp://www.doubleblackdesign.com
i have been working on mplab 7-60
but not abled to make out how to select language tool
will selection make some difference to this & is this software an
usefull one
Reply by husterk●October 11, 20072007-10-11
On Oct 11, 12:44 pm, addy <adhicall...@gmail.com> wrote:
> i am doing my final term project with this microcontroller , which is
> to interface this microcontroller with ethernet to take information
> from the server to authenticate the user depending upon the
> information entered by the user .....
> i want to know what all networking elements will be required to to
> interface this microcontroller with ethernet ...
>
> any information given can be very vital thanks for the help in my
> cause..
There are a couple ways to do this. The easiest way would be to
purchase a serial to ethernet gateway device and interface the
microcontroller to the gateway via thee serial port. Otherwise, you
will need to create the circuitry to interface to a MAC (Media Access
Controller) which will interface to a PHY (Physical Layer Controller)
via the MII (Media Independent Interface). The PHY will then need to
interface to a set of Ethernet Magnetics which will connect to the
standard Ethernet RJ45 connector. I have implemented a system like
this before and it is a lot of work. I would suggest you take a look
at Lantronix (see link below) and the products that they have to
offer.
http://www.lantronix.com
Keith
http://www.doubleblackdesign.com
Reply by Paul E. Bennett●October 11, 20072007-10-11
addy wrote:
> i am doing my final term project with this microcontroller , which is
> to interface this microcontroller with ethernet to take information
> from the server to authenticate the user depending upon the
> information entered by the user .....
> i want to know what all networking elements will be required to to
> interface this microcontroller with ethernet ...
>
> any information given can be very vital thanks for the help in my
> cause..
See http://www.google.com/
--
********************************************************************
Paul E. Bennett...............<email://Paul_E.Bennett@topmail.co.uk>
Forth based HIDECS Consultancy
Mob: +44 (0)7811-639972
Tel: +44 (0)1235-811095
Going Forth Safely ..... EBA. www.electric-boat-association.org.uk..
********************************************************************
Reply by addy●October 11, 20072007-10-11
i am doing my final term project with this microcontroller , which is
to interface this microcontroller with ethernet to take information
from the server to authenticate the user depending upon the
information entered by the user .....
i want to know what all networking elements will be required to to
interface this microcontroller with ethernet ...
any information given can be very vital thanks for the help in my
cause..