Subject: RE: [AT91SAM7] CrossConnect and
CrossWorks anyone? I need help with first download
Henk
I think I would dump this on s...@at91.com as my next
step. Atmel should help you to resolve this.
Al
From: A...@yahoogroups.com
[mailto:A...@yahoogroups.com] On Behalf Of Henk Visser Sent:
Wednesday, November 16, 2005 2:23 PM To: A...@yahoogroups.com Subject: Re: [AT91SAM7] CrossConnect and CrossWorks anyone? I need help
with first download
Al,
Thanks. I called Lloyd and he didn't have
much to say. I don't understand why it is so difficult to get help
with this.
-Henk
----- Original Message -----
From: Al Welch
To: A...@yahoogroups.com
Sent: Wednesday, November 16, 2005 12:02
PM
Subject: RE: [AT91SAM7] CrossConnect and
CrossWorks anyone? I need help with first download
Hi Henk
Reminder that the Atmel FAE in your area is as shown
below. Perhaps you should invite him to drop by and see what is going
on?
From: A...@yahoogroups.com
[mailto:A...@yahoogroups.com] On Behalf Of Henk Visser Sent:
Wednesday, November 16, 2005 11:53 AM To: A...@yahoogroups.com Subject: Re: [AT91SAM7] CrossConnect and CrossWorks anyone? I need help
with first download
I have tried but I am getting zero information
from them.
-Henk
----- Original Message -----
From: Michael Johnson
To: A...@yahoogroups.com
Sent: Tuesday, November 15, 2005 7:29
PM
Subject: Re: [AT91SAM7] CrossConnect and
CrossWorks anyone? I need help with first download
Hi Henk,
Sorry - I thought you were using
CrossWorks. Have you talked to IAR or ATMEL about this?
Regards Michael
> Mike, > > I am
using the IAR embedded workbench. Have you heard anything about >
IAR and the issues I a having? > > Thanks. > > -Henk > > > ----- Original Message ----- > *From:* Michael Johnson
<mailto:m...@rowley.co.uk> > *To:*
A...@yahoogroups.com <mailto:A...@yahoogroups.com> > *Sent:* Monday, November 14, 2005 11:04 PM > *Subject:* Re: [AT91SAM7] CrossConnect and
CrossWorks anyone? I > need help with first
download > > Hi Henk, > > The loader in the current CrossWorks product
doesn't clear lock > bits - I > can send you an updated one if you want. Also the
latest Segger > J-Link > firmware doesn't want to run the SAM7S reset
script which we are > investigating. > > Regards > Michael > > > I still have unresolved issues on why I am
receiveing verify > errors on > > our SAM764's. If you find anything out
please post. > > > > Thanks. >
> > > -Henk > > > > > > ----- Original
Message ----- > >
*From:* vt_snapshot <mailto:v...@yahoo.com> > > *To:*
A...@yahoogroups.com <mailto:A...@yahoogroups.com> > > *Sent:* Saturday,
November 12, 2005 6:32 PM >
> *Subject:* [AT91SAM7] CrossConnect and CrossWorks
anyone? I need > >
help with first download > > > > Hello Everyone, > > >
> I'm new here. I just got started on my
first ARM project after >
> spending years on the Atmel AVR family. > > I bought the
CrossWorks for ARM IDE and the Cross Connect JTAG > > adapter. > > >
> I'm trying to get my first test program to
download. > > It sees
the Cross Connect USB adapter and even can read my > target >
> device. >
> It says downloading "Loader.exe" to USB
CrossConnect. > > It
passes that OK. > >
It's when it downloads my test program into into the SAM7S64 > that it >
> gets a verify error. > > >
> I'm told there might be a possible Flash
programming issue > with the > > SAM764 at Atmel
right now. Has anyone else seen this or had >
problems > > with the
combo of tools I'm using? > > > > I've tried a
few different crystals (16MHz, 8MHz, 6MHz) and >
also tried > > a
number of fast and slow JTAG clocking speeds. >
> Same problem each time. > > >
> Any suggestions to a first timer on the ARM? > > > > > > > > > > > > > > > > > > > >
> >. > > > > >
> > > > >
>.>
Reply by Al Welch●November 16, 20052005-11-16
Hi Henk
Reminder that the Atmel FAE in your area is as shown
below. Perhaps you should invite him to drop by and see what is going
on?
From: A...@yahoogroups.com
[mailto:A...@yahoogroups.com] On Behalf Of Henk Visser Sent:
Wednesday, November 16, 2005 11:53 AM To: A...@yahoogroups.com Subject: Re: [AT91SAM7] CrossConnect and CrossWorks anyone? I need help
with first download
I have tried but I am getting zero information
from them.
-Henk
----- Original Message -----
From: Michael Johnson
To: A...@yahoogroups.com
Sent: Tuesday, November 15, 2005 7:29
PM
Subject: Re: [AT91SAM7] CrossConnect and
CrossWorks anyone? I need help with first download
Hi Henk,
Sorry - I thought you were using
CrossWorks. Have you talked to IAR or ATMEL about this?
Regards Michael
> Mike, > > I am
using the IAR embedded workbench. Have you heard anything about >
IAR and the issues I a having? > > Thanks. > > -Henk > > > ----- Original Message ----- > *From:* Michael Johnson
<mailto:m...@rowley.co.uk> > *To:*
A...@yahoogroups.com <mailto:A...@yahoogroups.com> > *Sent:* Monday, November 14, 2005 11:04 PM > *Subject:* Re: [AT91SAM7] CrossConnect and
CrossWorks anyone? I > need help with first
download > > Hi Henk, > > The loader in the current CrossWorks product
doesn't clear lock > bits - I > can send you an updated one if you want. Also the
latest Segger > J-Link > firmware doesn't want to run the SAM7S reset
script which we are > investigating. > > Regards > Michael > > > I still have unresolved issues on why I am
receiveing verify > errors on > > our SAM764's. If you find anything out
please post. > > > > Thanks. >
> > > -Henk > > > > > > ----- Original
Message ----- > >
*From:* vt_snapshot <mailto:v...@yahoo.com> > > *To:*
A...@yahoogroups.com <mailto:A...@yahoogroups.com> > > *Sent:* Saturday,
November 12, 2005 6:32 PM >
> *Subject:* [AT91SAM7] CrossConnect and CrossWorks
anyone? I need > >
help with first download > > > > Hello Everyone, > > >
> I'm new here. I just got started on my
first ARM project after >
> spending years on the Atmel AVR family. > > I bought the
CrossWorks for ARM IDE and the Cross Connect JTAG > > adapter. > > >
> I'm trying to get my first test program to
download. > > It sees
the Cross Connect USB adapter and even can read my > target >
> device. >
> It says downloading "Loader.exe" to USB
CrossConnect. > > It
passes that OK. > >
It's when it downloads my test program into into the SAM7S64 > that it >
> gets a verify error. > > >
> I'm told there might be a possible Flash
programming issue > with the > > SAM764 at Atmel
right now. Has anyone else seen this or had >
problems > > with the
combo of tools I'm using? > > > > I've tried a
few different crystals (16MHz, 8MHz, 6MHz) and >
also tried > > a
number of fast and slow JTAG clocking speeds. >
> Same problem each time. > > >
> Any suggestions to a first timer on the ARM? > > > > > > > > > > > > > > > > > > > >
> >. > > > > >
> > > > >
>.>
Reply by vt_snapshot●November 16, 20052005-11-16
When I was originally debugging my flash programming issue, I came
across the warnings in the data sheets about needing a fast VDDCORE
ramp up of 6V/ms I believe.
I looked at my original setup and found I was too slow if I turned my
power supply on vs. flipping the On/OFF switch on my test board.
In the end, the problem I had was solved by a new boot loader, but I
have seen where if I power up by the power supply switch, I get goofy
results. If the power supply capacitors are already up to voltage and
I flip the switch on my board, it works just fine.
So this power up process could be important for flash programming.
As for running once it is programmed, it seems to not matter as much
what happens on the power up cycle.
I'm very new to this chip so my experience is limited to a few dozen
flips of the power switch and shouldn't be taken as a final conclusion.
Reply by Al Welch●November 16, 20052005-11-16
Henk
I think I would dump this on s...@at91.com as my next
step. Atmel should help you to resolve this.
Al
From: A...@yahoogroups.com
[mailto:A...@yahoogroups.com] On Behalf Of Henk Visser Sent:
Wednesday, November 16, 2005 2:23 PM To: A...@yahoogroups.com Subject: Re: [AT91SAM7] CrossConnect and CrossWorks anyone? I need help
with first download
Al,
Thanks. I called Lloyd and he didn't have
much to say. I don't understand why it is so difficult to get help
with this.
-Henk
----- Original Message -----
From: Al Welch
To: A...@yahoogroups.com
Sent: Wednesday, November 16, 2005 12:02
PM
Subject: RE: [AT91SAM7] CrossConnect and
CrossWorks anyone? I need help with first download
Hi Henk
Reminder that the Atmel FAE in your area is as shown
below. Perhaps you should invite him to drop by and see what is going
on?
From: A...@yahoogroups.com
[mailto:A...@yahoogroups.com] On Behalf Of Henk Visser Sent:
Wednesday, November 16, 2005 11:53 AM To: A...@yahoogroups.com Subject: Re: [AT91SAM7] CrossConnect and CrossWorks anyone? I need help
with first download
I have tried but I am getting zero information
from them.
-Henk
----- Original Message -----
From: Michael Johnson
To: A...@yahoogroups.com
Sent: Tuesday, November 15, 2005 7:29
PM
Subject: Re: [AT91SAM7] CrossConnect and
CrossWorks anyone? I need help with first download
Hi Henk,
Sorry - I thought you were using
CrossWorks. Have you talked to IAR or ATMEL about this?
Regards Michael
> Mike, > > I am
using the IAR embedded workbench. Have you heard anything about >
IAR and the issues I a having? > > Thanks. > > -Henk > > > ----- Original Message ----- > *From:* Michael Johnson
<mailto:m...@rowley.co.uk> > *To:*
A...@yahoogroups.com <mailto:A...@yahoogroups.com> > *Sent:* Monday, November 14, 2005 11:04 PM > *Subject:* Re: [AT91SAM7] CrossConnect and
CrossWorks anyone? I > need help with first
download > > Hi Henk, > > The loader in the current CrossWorks product
doesn't clear lock > bits - I > can send you an updated one if you want. Also the
latest Segger > J-Link > firmware doesn't want to run the SAM7S reset
script which we are > investigating. > > Regards > Michael > > > I still have unresolved issues on why I am
receiveing verify > errors on > > our SAM764's. If you find anything out
please post. > > > > Thanks. >
> > > -Henk > > > > > > ----- Original
Message ----- > >
*From:* vt_snapshot <mailto:v...@yahoo.com> > > *To:*
A...@yahoogroups.com <mailto:A...@yahoogroups.com> > > *Sent:* Saturday,
November 12, 2005 6:32 PM >
> *Subject:* [AT91SAM7] CrossConnect and CrossWorks
anyone? I need > >
help with first download > > > > Hello Everyone, > > >
> I'm new here. I just got started on my
first ARM project after >
> spending years on the Atmel AVR family. > > I bought the
CrossWorks for ARM IDE and the Cross Connect JTAG > > adapter. > > >
> I'm trying to get my first test program to
download. > > It sees
the Cross Connect USB adapter and even can read my > target >
> device. >
> It says downloading "Loader.exe" to USB
CrossConnect. > > It
passes that OK. > >
It's when it downloads my test program into into the SAM7S64 > that it >
> gets a verify error. > > >
> I'm told there might be a possible Flash
programming issue > with the > > SAM764 at Atmel
right now. Has anyone else seen this or had >
problems > > with the
combo of tools I'm using? > > > > I've tried a
few different crystals (16MHz, 8MHz, 6MHz) and >
also tried > > a
number of fast and slow JTAG clocking speeds. >
> Same problem each time. > > >
> Any suggestions to a first timer on the ARM? > > > > > > > > > > > > > > > > > > > >
> >. > > > > >
> > > > >
>.>
Reply by Henk Visser●November 16, 20052005-11-16
Al,
Thanks. I called Lloyd and he didn't have
much to say. I don't understand why it is so difficult to get help
with this.
-Henk
----- Original Message -----
From: Al Welch
To: A...@yahoogroups.com
Sent: Wednesday, November 16, 2005 12:02
PM
Subject: RE: [AT91SAM7] CrossConnect and
CrossWorks anyone? I need help with first download
Hi Henk
Reminder that the Atmel FAE in your area is as shown
below. Perhaps you should invite him to drop by and see what is going
on?
From: A...@yahoogroups.com
[mailto:A...@yahoogroups.com] On Behalf Of Henk Visser Sent:
Wednesday, November 16, 2005 11:53 AM To: A...@yahoogroups.com Subject: Re: [AT91SAM7] CrossConnect and CrossWorks anyone? I need help
with first download
I have tried but I am getting zero information
from them.
-Henk
----- Original Message -----
From: Michael Johnson
To: A...@yahoogroups.com
Sent: Tuesday, November 15, 2005 7:29
PM
Subject: Re: [AT91SAM7] CrossConnect and
CrossWorks anyone? I need help with first download
Hi Henk,
Sorry - I thought you were using
CrossWorks. Have you talked to IAR or ATMEL about this?
Regards Michael
> Mike, > > I am
using the IAR embedded workbench. Have you heard anything about >
IAR and the issues I a having? > > Thanks. > > -Henk > > > ----- Original Message ----- > *From:* Michael Johnson
<mailto:m...@rowley.co.uk> > *To:*
A...@yahoogroups.com <mailto:A...@yahoogroups.com> > *Sent:* Monday, November 14, 2005 11:04 PM > *Subject:* Re: [AT91SAM7] CrossConnect and
CrossWorks anyone? I > need help with first
download > > Hi Henk, > > The loader in the current CrossWorks product
doesn't clear lock > bits - I > can send you an updated one if you want. Also the
latest Segger > J-Link > firmware doesn't want to run the SAM7S reset
script which we are > investigating. > > Regards > Michael > > > I still have unresolved issues on why I am
receiveing verify > errors on > > our SAM764's. If you find anything out
please post. > > > > Thanks. >
> > > -Henk > > > > > > ----- Original
Message ----- > >
*From:* vt_snapshot <mailto:v...@yahoo.com> > > *To:*
A...@yahoogroups.com <mailto:A...@yahoogroups.com> > > *Sent:* Saturday,
November 12, 2005 6:32 PM >
> *Subject:* [AT91SAM7] CrossConnect and CrossWorks
anyone? I need > >
help with first download > > > > Hello Everyone, > > >
> I'm new here. I just got started on my
first ARM project after >
> spending years on the Atmel AVR family. > > I bought the
CrossWorks for ARM IDE and the Cross Connect JTAG > > adapter. > > >
> I'm trying to get my first test program to
download. > > It sees
the Cross Connect USB adapter and even can read my > target >
> device. >
> It says downloading "Loader.exe" to USB
CrossConnect. > > It
passes that OK. > >
It's when it downloads my test program into into the SAM7S64 > that it >
> gets a verify error. > > >
> I'm told there might be a possible Flash
programming issue > with the > > SAM764 at Atmel
right now. Has anyone else seen this or had >
problems > > with the
combo of tools I'm using? > > > > I've tried a
few different crystals (16MHz, 8MHz, 6MHz) and >
also tried > > a
number of fast and slow JTAG clocking speeds. >
> Same problem each time. > > >
> Any suggestions to a first timer on the ARM? > > > > > > > > > > > > > > > > > > > >
> >. > > > > >
> > > > >
>.>
Reply by Bertrik Sikken●November 16, 20052005-11-16
This is cool stuff. Also nice to release it under BSD style license!
By the way, I think the Keil USB mass storage example for LPC214x
would be a nice complement to this software, see: http://www.keil.com/download/docs/307.asp
This would allow you to use the LPC to write files on the SD/MMC
card, then plug the LPC into a PC\'s USB port and let the PC
access the SD/MMC card like it was a removeable drive (and read
the files).
The device layer needs to be sufficiently independent, which
already seems to be the case in your code, although the API
probably needs to be a bit more elaborate. For example not just
read / write sector, but also functions to get card info (for the
SCSI INQUIRY command) and to get the size of the card (for the
SCSI GET CAPACITY command), etc.
I am myself thinking of using FAT32. I found this driver (GPL)
that already provides FAT32 read support: http://www.robs-projects.com/filelib.html
I am investigating if it is possible to add write support to it.
There really should be something small, portable and configureable
for FAT like lwIP (light-weight IP) is for embedded TCP/IP stacks.
Would be cool to call that "light-weight FAT" :)
All the best,
Bertrik Sikken
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (MingW32)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
Reply by Michael Johnson●November 16, 20052005-11-16
Hi Henk,
Sorry - I thought you were using CrossWorks. Have you talked to IAR or
ATMEL about this?
Regards
Michael
> Mike,
>
> I am using the IAR embedded workbench. Have you heard anything about
> IAR and the issues I a having?
>
> Thanks.
>
> -Henk
> ----- Original Message -----
> *From:* Michael Johnson <mailto:mpj@mpj@...>
> *To:* AT91SAM7@AT91... <mailto:AT91SAM7@AT91...>
> *Sent:* Monday, November 14, 2005 11:04 PM
> *Subject:* Re: [AT91SAM7] CrossConnect and CrossWorks anyone? I
> need help with first download
>
> Hi Henk,
>
> The loader in the current CrossWorks product doesn't clear lock
> bits - I
> can send you an updated one if you want. Also the latest Segger
> J-Link
> firmware doesn't want to run the SAM7S reset script which we are
> investigating.
>
> Regards
> Michael
>
> > I still have unresolved issues on why I am receiveing verify
> errors on
> > our SAM764's. If you find anything out please post.
> >
> > Thanks.
> >
> > -Henk
> >
> >
> > ----- Original Message -----
> > *From:* vt_snapshot <mailto:vt_snapshot@vt_s...>
> > *To:* AT91SAM7@AT91... <mailto:AT91SAM7@AT91...>
> > *Sent:* Saturday, November 12, 2005 6:32 PM
> > *Subject:* [AT91SAM7] CrossConnect and CrossWorks anyone? I need
> > help with first download
> >
> > Hello Everyone,
> >
> > I'm new here. I just got started on my first ARM project after
> > spending years on the Atmel AVR family.
> > I bought the CrossWorks for ARM IDE and the Cross Connect JTAG
> > adapter.
> >
> > I'm trying to get my first test program to download.
> > It sees the Cross Connect USB adapter and even can read my
> target
> > device.
> > It says downloading "Loader.exe" to USB CrossConnect.
> > It passes that OK.
> > It's when it downloads my test program into into the SAM7S64
> that it
> > gets a verify error.
> >
> > I'm told there might be a possible Flash programming issue
> with the
> > SAM764 at Atmel right now. Has anyone else seen this or had
> problems
> > with the combo of tools I'm using?
> >
> > I've tried a few different crystals (16MHz, 8MHz, 6MHz) and
> also tried
> > a number of fast and slow JTAG clocking speeds.
> > Same problem each time.
> >
> > Any suggestions to a first timer on the ARM?
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
> > >.
> >
> >
> >
>
>
>
> >.
>
>
Reply by codesn00p●November 15, 20052005-11-15
--- In AT91SAM7@AT91..., "Henk Visser" <dutchman1234@h...>
wrote: >
> I still have unresolved issues on why I am receiveing verify errors on our
SAM764's. If you find anything out please post. >
> Thanks.
>
> -Henk
>
> ----- Original Message -----
> From: vt_snapshot
> To: AT91SAM7@AT91...
> Sent: Saturday, November 12, 2005 6:32 PM
> Subject: [AT91SAM7] CrossConnect and CrossWorks anyone? I need help with
first download >
>
> Hello Everyone,
>
> I'm new here. I just got started on my first ARM project after
> spending years on the Atmel AVR family.
> I bought the CrossWorks for ARM IDE and the Cross Connect JTAG adapter.
>
> I'm trying to get my first test program to download.
> It sees the Cross Connect USB adapter and even can read my target
device.
> It says downloading "Loader.exe" to USB CrossConnect.
> It passes that OK.
> It's when it downloads my test program into into the SAM7S64 that
it
> gets a verify error.
>
> I'm told there might be a possible Flash programming issue with the
> SAM764 at Atmel right now. Has anyone else seen this or had problems
> with the combo of tools I'm using?
>
> I've tried a few different crystals (16MHz, 8MHz, 6MHz) and also
tried
> a number of fast and slow JTAG clocking speeds.
> Same problem each time.
>
> Any suggestions to a first timer on the ARM?
>
> SPONSORED LINKS Arm adjustable rate mortgage Arm mortgage rate Arm mortgage
> Lcd arm Arms Arm home mortgage
> ----
-- > YAHOO! GROUPS LINKS
>
> a..
> ----
-- >
There's a definate issue with the SAM7 flash programming. I spent nearly
all of last week
trying to program flash on a prototype board, we spoke to ATMEL on numerous
occasions,
we even sent one of our prototypes to rowley to see if they could see what the
problem
was.
As soon as they got the board they had no problem programming it - which was a
bit of a
relief, but then we had to track down the problem.
We've actually tracked the problem down to the bench supply. Our board
takes in 12V and
has on board regulators to 3.3V (and a few other rails we need).
Our bench supply has "Input On" and "Output On", if we leave
"Output On" and turn "Input
On" then we're unable to program flash - everything else works, you
can run code from
ram, the application works fine but you cannot program flash.
If you ensure that output is off when the bench supply is turned on, and then
turn on the
output after the input is turned on you can program the flash.
It's a really odd problem mainly because the processor appears to work
correctly - it's just
flash programming that doesn't work.
Reply by Henk Visser●November 15, 20052005-11-15
Mike,
I am using the IAR embedded workbench.
Have you heard anything about IAR and the issues I a having?
Thanks.
-Henk
----- Original Message -----
From: Michael Johnson
To: A...@yahoogroups.com
Sent: Monday, November 14, 2005 11:04
PM
Subject: Re: [AT91SAM7] CrossConnect and
CrossWorks anyone? I need help with first download
Hi Henk,
The loader in the current CrossWorks
product doesn't clear lock bits - I can send you an updated one if
you want. Also the latest Segger J-Link firmware doesn't want to run
the SAM7S reset script which we are investigating.
Regards Michael
> I still have unresolved issues on why I am receiveing
verify errors on > our SAM764's. If you find anything out please
post. > > Thanks. > > -Henk > > > ----- Original Message
----- > *From:* vt_snapshot
<mailto:v...@yahoo.com> > *To:*
A...@yahoogroups.com <mailto:A...@yahoogroups.com> > *Sent:* Saturday, November 12, 2005 6:32 PM > *Subject:* [AT91SAM7] CrossConnect and CrossWorks
anyone? I need > help with first download > > Hello Everyone, > > I'm new here. I just got started on my
first ARM project after > spending years on the
Atmel AVR family. > I bought the CrossWorks for
ARM IDE and the Cross Connect JTAG > adapter. > > I'm trying to get my first test
program to download. > It sees the Cross Connect
USB adapter and even can read my target >
device. > It says downloading "Loader.exe" to
USB CrossConnect. > It passes that OK. > It's when it downloads my test program into
into the SAM7S64 that it > gets a verify
error. > > I'm told there might be
a possible Flash programming issue with the >
SAM764 at Atmel right now. Has anyone else seen this or had problems > with the combo of tools I'm using? > > I've tried a few different
crystals (16MHz, 8MHz, 6MHz) and also tried > a
number of fast and slow JTAG clocking speeds. >
Same problem each time. > > Any
suggestions to a first timer on the ARM?> > >.>
Reply by Michael Johnson●November 15, 20052005-11-15
Hi Henk,
The loader in the current CrossWorks product doesn't clear lock bits - I
can send you an updated one if you want. Also the latest Segger J-Link
firmware doesn't want to run the SAM7S reset script which we are
investigating.
Regards
Michael
> I still have unresolved issues on why I am
receiveing verify errors on
> our SAM764's. If you find anything out please post.
>
> Thanks.
>
> -Henk
> ----- Original Message -----
> *From:* vt_snapshot <mailto:vt_snapshot@vt_s...>
> *To:* AT91SAM7@AT91... <mailto:AT91SAM7@AT91...>
> *Sent:* Saturday, November 12, 2005 6:32 PM
> *Subject:* [AT91SAM7] CrossConnect and CrossWorks anyone? I need
> help with first download
>
> Hello Everyone,
>
> I'm new here. I just got started on my first ARM project after
> spending years on the Atmel AVR family.
> I bought the CrossWorks for ARM IDE and the Cross Connect JTAG
> adapter.
>
> I'm trying to get my first test program to download.
> It sees the Cross Connect USB adapter and even can read my target
> device.
> It says downloading "Loader.exe" to USB CrossConnect.
> It passes that OK.
> It's when it downloads my test program into into the SAM7S64 that
it
> gets a verify error.
>
> I'm told there might be a possible Flash programming issue with the
> SAM764 at Atmel right now. Has anyone else seen this or had problems
> with the combo of tools I'm using?
>
> I've tried a few different crystals (16MHz, 8MHz, 6MHz) and also
tried
> a number of fast and slow JTAG clocking speeds.
> Same problem each time.
>
> Any suggestions to a first timer on the ARM?
>
> >.
>
>