> On 10 31 , 12 42 , "Ignacio G.T." <igtorque.rem...@evomer.yahoo.es>
> wrote:
>> escribi�:
>>
>>> i have a question. i implement uclinux on xilinx ml403.i turn on
>>> promiscouse mode, but i only receive brocast packet,not promiscouse
>>> mode packet, what's happen ? what's next step i will be do??? on
>>> uclinux kernel or ethernet driver???
>> Er... Have you connected your device to a hub, a switch or a router? In
>> turn connected to another devices, a LAN, Internet, or what?
>
> CONNECT TO A SWITCH,THE SAME COMPUTER, BUT NOT RECEIVE PACKET LIKE
> PROMISCOUSE.
If I understand you well, you are connecting your device to a switch,
and then you are trying to monitor with it the traffic that goes between
the other ports of the switch, right?
That will not work: a switch filters the traffic, and only delivers to
your device the layer 2 traffic that is directed to it, including layer
2 broadcast traffic.
If you want to monitor all the traffic, you need to use a hub (which is
"layer 1 device"), or use a switch that can be configured to deliver all
the traffic to one specific port.
> escribi=F3:
>
> > i have a question. i implement uclinux on xilinx ml403.i turn on
> > promiscouse mode, but i only receive brocast packet,not promiscouse
> > mode packet, what's happen ? what's next step i will be do??? on
> > uclinux kernel or ethernet driver???
>
> Er... Have you connected your device to a hub, a switch or a router? In
> turn connected to another devices, a LAN, Internet, or what?
CONNECT TO A SWITCH,THE SAME COMPUTER, BUT NOT RECEIVE PACKET LIKE
PROMISCOUSE.
Reply by Ignacio G.T.●October 30, 20072007-10-30
賴正岳 escribió:
> i have a question. i implement uclinux on xilinx ml403.i turn on
> promiscouse mode, but i only receive brocast packet,not promiscouse
> mode packet, what's happen ? what's next step i will be do??? on
> uclinux kernel or ethernet driver???
Er... Have you connected your device to a hub, a switch or a router? In
turn connected to another devices, a LAN, Internet, or what?
Reply by ●October 30, 20072007-10-30
i have a question. i implement uclinux on xilinx ml403.i turn on
promiscouse mode, but i only receive brocast packet,not promiscouse
mode packet, what's happen ? what's next step i will be do??? on
uclinux kernel or ethernet driver???