Reply by Vladimir Vassilevsky●November 1, 20072007-11-01
peustace wrote:
> Hi, I'm working on a project to port ucos-ii to the mc above. I'm new to
> rtos and embedded systems. Can anyone point me in the right direction to
> writing ports for this rtos. I'm reading labrosse's book but its not all
> making sense.
Continue to read the Labrosse's book till its all start making sense.
Vladimir Vassilevsky
DSP and Mixed Signal Design Consultant
http://www.abvolt.com
Reply by FreeRTOS.org●November 1, 20072007-11-01
"peustace" <0450707@student.ul.ie> wrote in message
news:WJidnQA7yNdASbTanZ2dnUVZ_sytnZ2d@giganews.com...
> Hi, I'm working on a project to port ucos-ii to the mc above. I'm new to
> rtos and embedded systems. Can anyone point me in the right direction to
> writing ports for this rtos. I'm reading labrosse's book but its not all
> making sense.
Is a port not already available that you can use?
You have not picked an easy task as your first venture in embedded systems -
unless this is a training exercise?
--
Regards,
Richard.
+ http://www.FreeRTOS.org
13 official architecture ports, 1000 downloads per week.
+ http://www.SafeRTOS.com
Certified by T�V as meeting the requirements for safety related systems.
Reply by peustace●November 1, 20072007-11-01
Hi, I'm working on a project to port ucos-ii to the mc above. I'm new to
rtos and embedded systems. Can anyone point me in the right direction to
writing ports for this rtos. I'm reading labrosse's book but its not all
making sense.
Thanks