>ven2007 escribi�:
>> hi
>>
>> I am new to embedded linux but not new to embedded systems.
>> I have an dev board ( LPC2148 - ARM7TDMI) at hand
>>
>> I would like to know where to get started to start working with
embedded
>> linux?
>> Do I need to know about linux device drivers to proceed ?
>>
>> Any guidance is appreciated
>
>I always like to read introductory material before getting my hands
>dirty with something new. If you are like me, I'd begin reading:
>
>Embedded Linux Primer, by Christopher Hallinan.
>
>These sites might also be helpful:
>
>http://free-electrons.com/
>http://linuxdevices.com/
>http://www.arm.linux.org.uk/
>
>comp.os.linux.embedded
>
Thanks for the recommendations
Will get this book and learn some more stuff before plunging into embedded
linux.
Reply by Ignacio G.T.●November 5, 20072007-11-05
ven2007 escribi�:
> hi
>
> I am new to embedded linux but not new to embedded systems.
> I have an dev board ( LPC2148 - ARM7TDMI) at hand
>
> I would like to know where to get started to start working with embedded
> linux?
> Do I need to know about linux device drivers to proceed ?
>
> Any guidance is appreciated
I always like to read introductory material before getting my hands
dirty with something new. If you are like me, I'd begin reading:
Embedded Linux Primer, by Christopher Hallinan.
These sites might also be helpful:
http://free-electrons.com/http://linuxdevices.com/http://www.arm.linux.org.uk/
comp.os.linux.embedded
Reply by FreeRTOS.org●November 5, 20072007-11-05
"ven2007" <reachvenhere@gmail.com> wrote in message
news:Q_ednZEb1qW2iLLanZ2dnUVZ_vShnZ2d@giganews.com...
> hi
>
> I am new to embedded linux but not new to embedded systems.
> I have an dev board ( LPC2148 - ARM7TDMI) at hand
>
> I would like to know where to get started to start working with embedded
> linux?
> Do I need to know about linux device drivers to proceed ?
>
> Any guidance is appreciated
>
> thanks in advance
>
I believe you need an MMU to run Linux, which the LPC2148 does not have.
There is a port of uCLinux for the LPC2000 family, I suggest you start by
looking this up. However, the LPC2148 only has 32K of RAM so this might be
pi**ing into the wind whatever.
--
Regards,
Richard.
+ http://www.FreeRTOS.org
13 official architecture ports, 1000 downloads per week.
+ http://www.SafeRTOS.com
Certified by T�V as meeting the requirements for safety related systems.
Reply by ven2007●November 5, 20072007-11-05
hi
I am new to embedded linux but not new to embedded systems.
I have an dev board ( LPC2148 - ARM7TDMI) at hand
I would like to know where to get started to start working with embedded
linux?
Do I need to know about linux device drivers to proceed ?
Any guidance is appreciated
thanks in advance