> Are there any recommendations for 8051 DeviceNet driver source code
> for a slave device? We are presently using Silicon Labs 8051 and the
> Keil compiler and tools. Silicon labs had a link to a supplier but
> they are no longer support the Silicon Labs 8051 for some reason. I
> don't mind paying for quality.
>
> Thanks,
>
> Peter Nachtwey
http://www.pyramidsolutions.com
is offering DeviceNet. Not for the 8051, but the stack uses an CAN driver
HAL. It should be possible to adopt the CAN used in the SiLabs. We are
offering CANopen for this controller. So at least we have some reusable
code for the basic CAN functions. May be you are able to glue it together.
--
with best regards / mit freundlichen Gr��en
Heinz-J�rgen Oertel
Reply by pnachtwey●November 30, 20072007-11-30
Are there any recommendations for 8051 DeviceNet driver source code
for a slave device? We are presently using Silicon Labs 8051 and the
Keil compiler and tools. Silicon labs had a link to a supplier but
they are no longer support the Silicon Labs 8051 for some reason. I
don't mind paying for quality.
Thanks,
Peter Nachtwey