In message <m3zlw69idm.fsf@donnybrook.brouhaha.com>, Eric Smith
<eric@brouhaha.com> writes
>>>> The jlink server is a Windows only program.
>>>I know. I asked for a Linux version in the Segger Forum. No answer from
>>>Segger so far.
>> I think the problem is that they would want to release it as a
>> commercial binary. Not Open Source.
>
>While open source would be nice, even a binary-only executable for
>Linux would save me the trouble of having an extra Windows machine
>sitting around only to be a debug server.
It has been brought to their attention...
--
\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
\/\/\/\/\ Chris Hills Staffs England /\/\/\/\/
/\/\/ chris@phaedsys.org www.phaedsys.org \/\/\
\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/
Reply by Eric Smith●December 19, 20072007-12-19
>>> The jlink server is a Windows only program.
>>I know. I asked for a Linux version in the Segger Forum. No answer from
>>Segger so far.
> I think the problem is that they would want to release it as a
> commercial binary. Not Open Source.
While open source would be nice, even a binary-only executable for
Linux would save me the trouble of having an extra Windows machine
sitting around only to be a debug server.
Reply by Chris Hills●December 15, 20072007-12-15
In message <fk0ij7$dqi$00$1@news.t-online.com>, Heinz-J�rgen Oertel
<hj.oertel@surfeu.de> writes
>Eric wrote:
>
>> The jlink server is a Windows only program.
>
>I know. I asked for a Linux version in the Segger Forum. No answer from
>Segger so far.
I think the problem is that they would want to release it as a
commercial binary. Not Open Source.
--
\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
\/\/\/\/\ Chris Hills Staffs England /\/\/\/\/
/\/\/ chris@phaedsys.org www.phaedsys.org \/\/\
\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/
Reply by ●December 15, 20072007-12-15
Eric wrote:
> The jlink server is a Windows only program.
I know. I asked for a Linux version in the Segger Forum. No answer from
Segger so far.
Heinz
Reply by Eric●December 14, 20072007-12-14
The jlink server is a Windows only program.
Reply by Robertus●December 10, 20072007-12-10
On Dec 9, 11:25 pm, Heinz-J=FCrgen Oertel <hj.oer...@surfeu.de> wrote:
> Chris Hills wrote:
> > In message <fje5tp$hnc$0...@news.t-online.com>, Heinz-J=FCrgen Oertel
> > <hj.oer...@surfeu.de> writes
> >>Hello,
> >>just to be sure, can anyone confirm, the J-link from Segger
> >>http://www.segger.com/jlink.html, or IAR, can nit be used under Linux. I=
s
> >>this correct?
>
> > The J-link is hardware... there is no Linux Sw for the J-link at the
> > moment. Though it does have a gdb server (which isn't open source)
>
> > Regards
> > Chris
>
> Chris,
> does this mean that debuggers like ddd or Insight can be used under Linux
> connected to the gdb server serving the J-Link hardware?
> I can not find anything gdb-server related on the Segger site. Where can I=
> find more information about it? Even if it is not open source, depending o=
n
> the price, I like to get it, because we have some of these hardware parts
> available.
>
> Regards
> Heinz
Hello Heinz,
2 options where to start:
http://www.segger.com/jlink_software_overview.html at the bottom of
the page a link to GDB server
Option #2, there is a new Support forum from SEGGER
http://www.segger2.com/
Could be worth to sign up and post your specific question in "J-Link
related"
Robert
Reply by ●December 9, 20072007-12-09
Chris Hills wrote:
> In message <fje5tp$hnc$01$1@news.t-online.com>, Heinz-J�rgen Oertel
> <hj.oertel@surfeu.de> writes
>>Hello,
>>just to be sure, can anyone confirm, the J-link from Segger
>>http://www.segger.com/jlink.html, or IAR, can nit be used under Linux. Is
>>this correct?
>
> The J-link is hardware... there is no Linux Sw for the J-link at the
> moment. Though it does have a gdb server (which isn't open source)
>
>
>
> Regards
> Chris
>
Chris,
does this mean that debuggers like ddd or Insight can be used under Linux
connected to the gdb server serving the J-Link hardware?
I can not find anything gdb-server related on the Segger site. Where can I
find more information about it? Even if it is not open source, depending on
the price, I like to get it, because we have some of these hardware parts
available.
Regards
Heinz
Reply by Chris Hills●December 9, 20072007-12-09
In message <fje5tp$hnc$01$1@news.t-online.com>, Heinz-J�rgen Oertel
<hj.oertel@surfeu.de> writes
>Hello,
>just to be sure, can anyone confirm, the J-link from Segger
>http://www.segger.com/jlink.html, or IAR, can nit be used under Linux. Is
>this correct?
The J-link is hardware... there is no Linux Sw for the J-link at the
moment. Though it does have a gdb server (which isn't open source)
Regards
Chris
--
\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
\/\/\/\/\ Chris Hills Staffs England /\/\/\/\/
/\/\/ chris@phaedsys.org www.phaedsys.org \/\/\
\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/
Reply by ●December 8, 20072007-12-08
Hello,
just to be sure, can anyone confirm, the J-link from Segger
http://www.segger.com/jlink.html, or IAR, can nit be used under Linux. Is
this correct?
Best regards
Heinz