Hi,
I am looking for an open source RTOS for Keil MCB2130
(LPC2138) board with TCP/IP. This board does not have
Ethernet. I want to use a Bluetooth (PPP over serial
Bluetooth) or WLAN(GPIO interface) with LPC2138.
Has anybody tried it?
Please give your suggestions. Thanks.
Regards,
Balaji
--- Dan Beadle <dan.beadle@dan....>
wrote:
> Thanks.
>
> This will make FreeRTOS easy for those of us using
> IAR
>
> _____
>
> From: lpc2000@lpc2...
> [mailto:lpc2000@lpc2...] On Behalf
> Of FreeRTOS Info
> Sent: Friday, September 23, 2005 8:53 AM
> To: lpc2000@lpc2...
> Subject: Re: [lpc2000] Re: LPC2138 and FreeRTOS
>
> > Go to www.freertos.org <http://www.freertos.org/>
> . Richard has a
> wide
> > variety of ports, including the Keil MB2100 board.
> I am trying to get
> > him to post the IAR port to the LPC (there is
> difference in the way
> the
> > assembly language is done between Keil and IAR -
> Keil has a better asm
> > macro). Comments to him will help.
>
> Dan,
>
> I've just uploaded FreeRTOS V3.2.2. This adds a
> supported IAR LPC2129
> port.
> Converting to an LPC2138 should not be a problem.
>
> Regards,
> Richard.
> http://www.FreeRTOS.org
>
>
> >
> >
> > Freertos is supported on everything from PIC to
> LPC to PC.
> >
> >
> >
> > Dan
> >
> >
> >
> >
> >
> > _____
> >
> > From: lpc2000@lpc2...
> [mailto:lpc2000@lpc2...] On
> Behalf
> > Of lehighuboy
> > Sent: Friday, September 16, 2005 8:54 AM
> > To: lpc2000@lpc2...
> > Subject: [lpc2000] Re: LPC2138 and FreeRTOS
> >
> >
> >
> > Dan,
> >
> > Where can I get a copy of the Keil port of the
> rtos?
> >
> > Thanks, Garrett
> >
> > --- In lpc2000@lpc2..., "Dan Beadle"
> <dan.beadle@i...> wrote:
> > > Thanks for pointing this out. The credentials
> were temporarily
> > disabled.
> > > You should be able to get in now. The link
> should be
> > >
> > > ftp::/ftp.inclinesoftworks.com if using IE, or
> just
> > ftp.inclinesoftworks.com
> > > <ftp://ftp.inclinesoftworks.com/> if using
> ftp.com <ftp://ftp.com/>
> > > command line
> > >
> > >
> > >
> > > Dan
> > >
> > >
> > >
> > > _____
> > >
> > > From: lpc2000@lpc2...
> [mailto:lpc2000@lpc2...] On
> > Behalf Of
> > > Rock Dubois
> > > Sent: Thursday, September 15, 2005 8:30 PM
> > > To: lpc2000@lpc2...
> > > Subject: RE: [lpc2000] Re: LPC2138 and FreeRTOS
> > >
> > >
> > >
> > > Dan,
> > >
> > > I tried to download it from your ftp site but it
> didn't let me in.
> > I tried
> > > again but still not able to login.
> > >
> > > Yvon.
> > >
> > >
> > > Dan Beadle <dan.beadle@i...> wrote:
> > > I have just posted FreeRTOS Version 3.20 for
> IAR/ARM on my website
> > > ftp://inclinesoftworks.com
> <ftp://inclinesoftworks.com/> Use
> > UserName
> > > incline9_cust and pw freertos.
> > >
> > >
> > >
> > > This version of FreeRTOS has been adapted to
> IAR/ARM. (Using Version
> > > 4.30a of WARM). It works with MCB2100 Eval
> Board. It is adapted
> > from
> > > the Keil and SAM versions of the RTOS.
> > >
> > >
> > >
> > > If you have questions, you can contact me..
> > >
> > > Dan Beadle
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > _____
> > >
> > > From: lpc2000@lpc2...
> [mailto:lpc2000@lpc2...] On
> > Behalf
> > > Of charlesgrenz
> > > Sent: Wednesday, August 24, 2005 3:39 PM
> > > To: lpc2000@lpc2...
> > > Subject: [lpc2000] Re: LPC2138 and FreeRTOS
> > >
> > >
> > >
> > > Hi Dan,
> > >
> > > Did you find the port from gcc to IAR
> difficult? I am using IAR
> > and
> > > I was looking at the LPC2106 gcc version and
> porting that to the IAR
> > > 2106.
> > >
> > > Thanks,
> > > Charles
> > >
> > >
> > >
> > > --- In lpc2000@lpc2..., "Dan Beadle"
> <dan.beadle@i...>
> > wrote:
> > > > I did an early port of this to the IAR tool
> chain. It took a
> > while to
> > > > get my mind around all the files, but, in
> truth, it is quite
> > small and
> > > > easy to work with. The documentation is only
> available online. I
> > > would
> > > > prefer a PDF to a web page, but that is a nit.
> > > >
> > > >
> > > >
> > > > I am using FreeRTOS on several projects. I
> like the following
> > > features:
> === message truncated ===
Dream is just a dream. A goal is a dream with a plan and a deadline.
- Harvey Mackay
Thanks.
This will make FreeRTOS easy for those of us using IAR
_____
From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On Behalf
Of FreeRTOS Info
Sent: Friday, September 23, 2005 8:53 AM
To: lpc2000@lpc2...
Subject: Re: [lpc2000] Re: LPC2138 and FreeRTOS
> Go to www.freertos.org
<http://www.freertos.org/> . Richard has a wide > variety of ports, including the Keil MB2100 board.
I am trying to get
> him to post the IAR port to the LPC (there is difference in the way the > assembly language is done between Keil and IAR -
Keil has a better asm
> macro). Comments to him will help.
>
Dan,
I've just uploaded FreeRTOS V3.2.2. This adds a supported IAR LPC2129
port.
Converting to an LPC2138 should not be a problem.
>
>
> Freertos is supported on everything from PIC to LPC to PC.
>
> Dan
> _____
>
> From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On Behalf > Of lehighuboy
> Sent: Friday, September 16, 2005 8:54 AM
> To: lpc2000@lpc2...
> Subject: [lpc2000] Re: LPC2138 and FreeRTOS
>
> Dan,
>
> Where can I get a copy of the Keil port of the rtos?
>
> Thanks, Garrett
>
> --- In lpc2000@lpc2..., "Dan Beadle" <dan.beadle@i...>
wrote:
> > Thanks for pointing this out. The credentials were temporarily
> disabled.
> > You should be able to get in now. The link should be
> >
> > ftp::/ftp.inclinesoftworks.com if using IE, or just
> ftp.inclinesoftworks.com
> > <ftp://ftp.inclinesoftworks.com/> if using ftp.com
<ftp://ftp.com/>
> > command line
> >
> >
> >
> > Dan
> >
> >
> >
> > _____
> >
> > From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
> Behalf Of
> > Rock Dubois
> > Sent: Thursday, September 15, 2005 8:30 PM
> > To: lpc2000@lpc2...
> > Subject: RE: [lpc2000] Re: LPC2138 and FreeRTOS
> >
> >
> >
> > Dan,
> >
> > I tried to download it from your ftp site but it didn't let me
in.
> I tried
> > again but still not able to login.
> >
> > Yvon.
> >
> >
> > Dan Beadle <dan.beadle@i...> wrote:
> > I have just posted FreeRTOS Version 3.20 for IAR/ARM on my website
> > ftp://inclinesoftworks.com <ftp://inclinesoftworks.com/> Use
> UserName
> > incline9_cust and pw freertos.
> >
> >
> >
> > This version of FreeRTOS has been adapted to IAR/ARM. (Using
Version
> > 4.30a of WARM). It works with MCB2100 Eval Board. It is adapted
> from
> > the Keil and SAM versions of the RTOS.
> >
> >
> >
> > If you have questions, you can contact me..
> >
> > Dan Beadle
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > _____
> >
> > From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
> Behalf
> > Of charlesgrenz
> > Sent: Wednesday, August 24, 2005 3:39 PM
> > To: lpc2000@lpc2...
> > Subject: [lpc2000] Re: LPC2138 and FreeRTOS
> >
> >
> >
> > Hi Dan,
> >
> > Did you find the port from gcc to IAR difficult? I am using IAR
> and
> > I was looking at the LPC2106 gcc version and porting that to the
IAR
> > 2106.
> >
> > Thanks,
> > Charles
> >
> >
> >
> > --- In lpc2000@lpc2..., "Dan Beadle"
<dan.beadle@i...>
> wrote:
> > > I did an early port of this to the IAR tool chain. It took a
> while to
> > > get my mind around all the files, but, in truth, it is quite
> small and
> > > easy to work with. The documentation is only available online.
I
> > would
> > > prefer a PDF to a web page, but that is a nit.
> > >
> > >
> > >
> > > I am using FreeRTOS on several projects. I like the following
> > features:
> > >
> > >
> > >
> > > - Lean (small footprint, only the features I need.)
> > >
> > > - Evolving (almost too many code drops. I am giving up on
> > > chasing changes)
> > >
> > > - Tractable. I got my mind around the entire code base,
> > because
> > > it is so small
> > >
> > >
> > >
> > > In the past, deeply embedded projects often would not use any
> RTOS.
> > This
> > > brings true tasking to my systems without the overhead and cost
of
> > WinCE
> > > or Linux. I considered uCOS, but this package does all that I
> need
> > from
> > > uCOS. And the price is right.
> > >
> > >
> > >
> > > _____
> > >
> > > From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
> > Behalf
> > > Of Peter Homann
> > > Sent: Wednesday, August 24, 2005 5:15 AM
> > > To: lpc2000@lpc2...
> > > Subject: [lpc2000] LPC2138 and FreeRTOS
> > >
> > >
> > >
> > > Hi,
> > >
> > > I'm looking at using FreeRTOS on a LPC2138 based project.
Does
> anyone
> > > have any opinions, tips or experiences they could share on how
> > > successful this combination is.
> > >
> > > Thanks in advance.
> > >
> > > Cheers,
> > >
> > > Peter.
> > > --
> > > ------------------------------
> > > Web: www.homanndesigns.com
> > > email: homann@h...
> > > Phone: +61 421 601 665
> > > www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
> > > www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
> > >
> > >
> > >
> > > _____
> > >
> > > > .
> > >
> > >
> > >
> > > _____
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> > SPONSORED LINKS
> >
> > Microcontrollers
> > <http://groups.yahoo.com/gads?t=ms
> > <http://groups.yahoo.com/gads?
> t=ms&k=Microcontrollers&w1=Microcontroller>
> > &k=Microcontrollers&w1=Microcontroller
> >
>
s&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&w
> 5=
> >
8085+microprocessor&c=5&s0&.sig=OPqm0ilH6VyGn-geZ0nNwA>
> >
> > Microprocessor
> > <http://groups.yahoo.com/gads?t=ms
> > <http://groups.yahoo.com/gads?
> t=ms&k=Microprocessor&w1=Microcontrollers&>
> > &k=Microprocessor&w1=Microcontrollers&
> >
>
w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&w5=
> 80
> > 85+microprocessor&c=5&s0&.sig93hF7rArBsrPQJltQ_w>
> >
> > Intel microprocessors
> > <http://groups.yahoo.com/gads?t=ms
> > <http://groups.yahoo.com/gads?
> t=ms&k=Intel+microprocessors&w1=Microcontr>
> > &k=Intel+microprocessors&w1=Microcontr
> >
>
ollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontroll
> er
> >
s&w585+microprocessor&c=5&s0&.sigrTtKaQUw-Vd0BgTdDmw>
> >
> > Pic microcontrollers
> > <http://groups.yahoo.com/gads?t=ms
> > <http://groups.yahoo.com/gads?
> t=ms&k=Pic+microcontrollers&w1=Microcontro>
> > &k=Pic+microcontrollers&w1=Microcontro
> >
>
llers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrolle
> rs
> >
&w585+microprocessor&c=5&s0&.sig=iYT6za1gT3-VT1hwIylDpw>
> >
> > 8085 microprocessor
> > <http://groups.yahoo.com/gads?t=ms
> > <http://groups.yahoo.com/gads?
> t=ms&k85+microprocessor&w1=Microcontrol>
> > &k85+microprocessor&w1=Microcontrol
> >
>
lers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontroller
> s&
> >
w585+microprocessor&c=5&s0&.sig=PhYMBsCkQptYbazQFyNujQ>
> >
> >
> >
> >
> >
> > _____
> >
> > > .
> >
> >
> >
> > _____
> >
> >
> >
> >
> >
> >
> >
> > ---------------------------------
> > > Terms of Service.
> >
> >
> >
> > _____
> >
> >
> >
>
>
> SPONSORED LINKS
>
> Microprocessor
> <http://groups.yahoo.com/gads?t=ms&k=Microprocessor&w1=Microprocessor&w2 > =Microcontrollers&w3=Pic+microcontrollers&w451+microprocessor&c=4&s=9 > 3&.sig=tsVC-J9hJ5qyXg0WPR0l6g>
>
> Microcontrollers
> <http://groups.yahoo.com/gads?t=ms&k=Microcontrollers&w1=Microprocessor& > w2=Microcontrollers&w3=Pic+microcontrollers&w451+microprocessor&c=4&s > &.sig=DvJVNqC_pqRTm8Xq01nxwg>
>
> Pic microcontrollers
> <http://groups.yahoo.com/gads?t=ms&k=Pic+microcontrollers&w1=Microproces > sor&w2=Microcontrollers&w3=Pic+microcontrollers&w451+microprocessor&c > =4&s&.sig=TpkoX4KofDJ7c6LyBvUqVQ>
>
> 8051 microprocessor
> <http://groups.yahoo.com/gads?t=ms&k51+microprocessor&w1=Microprocess > or&w2=Microcontrollers&w3=Pic+microcontrollers&w451+microprocessor&c= > 4&s&.sig=1Ipf1Fjfbd_HVIlekkDP-A
>
>
> _____
>
> > .
>
> _____
--
------ > > .
_____
Reply by FreeRTOS Info●September 23, 20052005-09-23
> Go to www.freertos.org <http://www.freertos.org/> . Richard has a
wide > variety of ports, including the Keil MB2100 board.
I am trying to get
> him to post the IAR port to the LPC (there is difference in the way the
> assembly language is done between Keil and IAR - Keil has a better asm
> macro). Comments to him will help.
>
Dan,
I've just uploaded FreeRTOS V3.2.2. This adds a supported IAR LPC2129
port.
Converting to an LPC2138 should not be a problem.
>
>
> Freertos is supported on everything from PIC to LPC to PC.
>
> Dan
> _____
>
> From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On Behalf
> Of lehighuboy
> Sent: Friday, September 16, 2005 8:54 AM
> To: lpc2000@lpc2...
> Subject: [lpc2000] Re: LPC2138 and FreeRTOS
>
> Dan,
>
> Where can I get a copy of the Keil port of the rtos?
>
> Thanks, Garrett
>
> --- In lpc2000@lpc2..., "Dan Beadle" <dan.beadle@i...>
wrote:
> > Thanks for pointing this out. The credentials were temporarily
> disabled.
> > You should be able to get in now. The link should be
> >
> > ftp::/ftp.inclinesoftworks.com if using IE, or just
> ftp.inclinesoftworks.com
> > <ftp://ftp.inclinesoftworks.com/> if using ftp.com
<ftp://ftp.com/>
> > command line
> >
> >
> >
> > Dan
> >
> >
> >
> > _____
> >
> > From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
> Behalf Of
> > Rock Dubois
> > Sent: Thursday, September 15, 2005 8:30 PM
> > To: lpc2000@lpc2...
> > Subject: RE: [lpc2000] Re: LPC2138 and FreeRTOS
> >
> >
> >
> > Dan,
> >
> > I tried to download it from your ftp site but it didn't let me
in.
> I tried
> > again but still not able to login.
> >
> > Yvon.
> >
> >
> > Dan Beadle <dan.beadle@i...> wrote:
> > I have just posted FreeRTOS Version 3.20 for IAR/ARM on my website
> > ftp://inclinesoftworks.com <ftp://inclinesoftworks.com/> Use
> UserName
> > incline9_cust and pw freertos.
> >
> >
> >
> > This version of FreeRTOS has been adapted to IAR/ARM. (Using
Version
> > 4.30a of WARM). It works with MCB2100 Eval Board. It is adapted
> from
> > the Keil and SAM versions of the RTOS.
> >
> >
> >
> > If you have questions, you can contact me..
> >
> > Dan Beadle
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > _____
> >
> > From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
> Behalf
> > Of charlesgrenz
> > Sent: Wednesday, August 24, 2005 3:39 PM
> > To: lpc2000@lpc2...
> > Subject: [lpc2000] Re: LPC2138 and FreeRTOS
> >
> >
> >
> > Hi Dan,
> >
> > Did you find the port from gcc to IAR difficult? I am using IAR
> and
> > I was looking at the LPC2106 gcc version and porting that to the
IAR
> > 2106.
> >
> > Thanks,
> > Charles
> >
> >
> >
> > --- In lpc2000@lpc2..., "Dan Beadle"
<dan.beadle@i...>
> wrote:
> > > I did an early port of this to the IAR tool chain. It took a
> while to
> > > get my mind around all the files, but, in truth, it is quite
> small and
> > > easy to work with. The documentation is only available online.
I
> > would
> > > prefer a PDF to a web page, but that is a nit.
> > >
> > >
> > >
> > > I am using FreeRTOS on several projects. I like the following
> > features:
> > >
> > >
> > >
> > > - Lean (small footprint, only the features I need.)
> > >
> > > - Evolving (almost too many code drops. I am giving up on
> > > chasing changes)
> > >
> > > - Tractable. I got my mind around the entire code base,
> > because
> > > it is so small
> > >
> > >
> > >
> > > In the past, deeply embedded projects often would not use any
> RTOS.
> > This
> > > brings true tasking to my systems without the overhead and cost
of
> > WinCE
> > > or Linux. I considered uCOS, but this package does all that I
> need
> > from
> > > uCOS. And the price is right.
> > >
> > >
> > >
> > > _____
> > >
> > > From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
> > Behalf
> > > Of Peter Homann
> > > Sent: Wednesday, August 24, 2005 5:15 AM
> > > To: lpc2000@lpc2...
> > > Subject: [lpc2000] LPC2138 and FreeRTOS
> > >
> > >
> > >
> > > Hi,
> > >
> > > I'm looking at using FreeRTOS on a LPC2138 based project.
Does
> anyone
> > > have any opinions, tips or experiences they could share on how
> > > successful this combination is.
> > >
> > > Thanks in advance.
> > >
> > > Cheers,
> > >
> > > Peter.
> > > --
> > > ------------------------------
> > > Web: www.homanndesigns.com
> > > email: homann@h...
> > > Phone: +61 421 601 665
> > > www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
> > > www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
> > >
> > >
> > >
> > > _____
> > >
> > > > .
> > >
> > >
> > >
> > > _____
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> > SPONSORED LINKS
> >
> > Microcontrollers
> > <http://groups.yahoo.com/gads?t=ms
> > <http://groups.yahoo.com/gads?
> t=ms&k=Microcontrollers&w1=Microcontroller>
> > &k=Microcontrollers&w1=Microcontroller
> >
>
s&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&w
> 5=
> >
8085+microprocessor&c=5&s0&.sig=OPqm0ilH6VyGn-geZ0nNwA>
> >
> > Microprocessor
> > <http://groups.yahoo.com/gads?t=ms
> > <http://groups.yahoo.com/gads?
> t=ms&k=Microprocessor&w1=Microcontrollers&>
> > &k=Microprocessor&w1=Microcontrollers&
> >
>
w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&w5=
> 80
> > 85+microprocessor&c=5&s0&.sig93hF7rArBsrPQJltQ_w>
> >
> > Intel microprocessors
> > <http://groups.yahoo.com/gads?t=ms
> > <http://groups.yahoo.com/gads?
> t=ms&k=Intel+microprocessors&w1=Microcontr>
> > &k=Intel+microprocessors&w1=Microcontr
> >
>
ollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontroll
> er
> >
s&w585+microprocessor&c=5&s0&.sigrTtKaQUw-Vd0BgTdDmw>
> >
> > Pic microcontrollers
> > <http://groups.yahoo.com/gads?t=ms
> > <http://groups.yahoo.com/gads?
> t=ms&k=Pic+microcontrollers&w1=Microcontro>
> > &k=Pic+microcontrollers&w1=Microcontro
> >
>
llers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrolle
> rs
> >
&w585+microprocessor&c=5&s0&.sig=iYT6za1gT3-VT1hwIylDpw>
> >
> > 8085 microprocessor
> > <http://groups.yahoo.com/gads?t=ms
> > <http://groups.yahoo.com/gads?
> t=ms&k85+microprocessor&w1=Microcontrol>
> > &k85+microprocessor&w1=Microcontrol
> >
>
lers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontroller
> s&
> >
w585+microprocessor&c=5&s0&.sig=PhYMBsCkQptYbazQFyNujQ>
> >
> >
> >
> >
> >
> > _____
> >
> > > .
> >
> >
> >
> > _____
> >
> >
> >
> >
> >
> >
> >
> > ---------------------------------
> > > Terms of Service.
> >
> >
> >
> > _____
> >
> >
> >
>
>
> SPONSORED LINKS
>
> Microprocessor
>
<http://groups.yahoo.com/gads?t=ms&k=Microprocessor&w1=Microprocessor&w2
>
=Microcontrollers&w3=Pic+microcontrollers&w451+microprocessor&c=4&s=9
> 3&.sig=tsVC-J9hJ5qyXg0WPR0l6g>
>
> Microcontrollers
>
<http://groups.yahoo.com/gads?t=ms&k=Microcontrollers&w1=Microprocessor&
>
w2=Microcontrollers&w3=Pic+microcontrollers&w451+microprocessor&c=4&s
> &.sig=DvJVNqC_pqRTm8Xq01nxwg>
>
> Pic microcontrollers
>
<http://groups.yahoo.com/gads?t=ms&k=Pic+microcontrollers&w1=Microproces
>
sor&w2=Microcontrollers&w3=Pic+microcontrollers&w451+microprocessor&c
> =4&s&.sig=TpkoX4KofDJ7c6LyBvUqVQ>
>
> 8051 microprocessor
>
<http://groups.yahoo.com/gads?t=ms&k51+microprocessor&w1=Microprocess
>
or&w2=Microcontrollers&w3=Pic+microcontrollers&w451+microprocessor&c=
> 4&s&.sig=1Ipf1Fjfbd_HVIlekkDP-A
>
>
> _____
>
> > .
>
> _____
>
>
> -- ------ > YAHOO! GROUPS LINKS
>
> a..
> -- ------ >
>
Reply by Dan Beadle●September 19, 20052005-09-19
Go to www.freertos.org <http://www.freertos.org/> . Richard has a
wide
variety of ports, including the Keil MB2100 board. I am trying to get
him to post the IAR port to the LPC (there is difference in the way the
assembly language is done between Keil and IAR - Keil has a better asm
macro). Comments to him will help.
Freertos is supported on everything from PIC to LPC to PC.
Dan
_____
From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On Behalf
Of lehighuboy
Sent: Friday, September 16, 2005 8:54 AM
To: lpc2000@lpc2...
Subject: [lpc2000] Re: LPC2138 and FreeRTOS
Dan,
Where can I get a copy of the Keil port of the rtos?
Thanks, Garrett
--- In lpc2000@lpc2..., "Dan Beadle" <dan.beadle@i...> wrote: > Thanks for pointing this out. The credentials were
temporarily disabled. > You should be able to get in now. The link should
be
>
> ftp::/ftp.inclinesoftworks.com if using IE, or just ftp.inclinesoftworks.com > <ftp://ftp.inclinesoftworks.com/> if using
ftp.com <ftp://ftp.com/>
> command line
>
> Dan
>
> _____
>
> From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On Behalf Of > Rock Dubois
> Sent: Thursday, September 15, 2005 8:30 PM
> To: lpc2000@lpc2...
> Subject: RE: [lpc2000] Re: LPC2138 and FreeRTOS
>
> Dan,
>
> I tried to download it from your ftp site but it didn't let me in. I tried > again but still not able to login.
>
> Yvon.
> Dan Beadle <dan.beadle@i...> wrote:
> I have just posted FreeRTOS Version 3.20 for IAR/ARM on my website
> ftp://inclinesoftworks.com <ftp://inclinesoftworks.com/> Use UserName > incline9_cust and pw freertos.
>
> This version of FreeRTOS has been adapted to IAR/ARM. (Using Version
> 4.30a of WARM). It works with MCB2100 Eval Board. It is adapted from > the Keil and SAM versions of the RTOS.
>
> If you have questions, you can contact me..
>
> Dan Beadle
>
> _____
>
> From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On Behalf > Of charlesgrenz
> Sent: Wednesday, August 24, 2005 3:39 PM
> To: lpc2000@lpc2...
> Subject: [lpc2000] Re: LPC2138 and FreeRTOS
>
> Hi Dan,
>
> Did you find the port from gcc to IAR difficult? I am using IAR and > I was looking at the LPC2106 gcc version and
porting that to the IAR
> 2106.
>
> Thanks,
> Charles
>
> --- In lpc2000@lpc2..., "Dan Beadle" <dan.beadle@i...> wrote: > > I did an early port of this to the IAR tool
chain. It took a while to > > get my mind around all the files, but, in
truth, it is quite small and > > easy to work with. The documentation is only
available online. I
> would
> > prefer a PDF to a web page, but that is a nit.
> >
> >
> >
> > I am using FreeRTOS on several projects. I like the following
> features:
> >
> >
> >
> > - Lean (small footprint, only the features I need.)
> >
> > - Evolving (almost too many code drops. I am giving up on
> > chasing changes)
> >
> > - Tractable. I got my mind around the entire code base,
> because
> > it is so small
> >
> >
> >
> > In the past, deeply embedded projects often would not use any RTOS. > This
> > brings true tasking to my systems without the overhead and cost of
> WinCE
> > or Linux. I considered uCOS, but this package does all that I need > from
> > uCOS. And the price is right.
> >
> >
> >
> > _____
> >
> > From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
> Behalf
> > Of Peter Homann
> > Sent: Wednesday, August 24, 2005 5:15 AM
> > To: lpc2000@lpc2...
> > Subject: [lpc2000] LPC2138 and FreeRTOS
> >
> >
> >
> > Hi,
> >
> > I'm looking at using FreeRTOS on a LPC2138 based project. Does
anyone > > have any opinions, tips or experiences they
could share on how
> > successful this combination is.
> >
> > Thanks in advance.
> >
> > Cheers,
> >
> > Peter.
> > --
> > ------------------------------
> > Web: www.homanndesigns.com
> > email: homann@h...
> > Phone: +61 421 601 665
> > www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
> > www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
> >
> >
> >
> > _____
> >
> > > .
> >
> >
> >
> > _____
> >
> >
> >
>
> SPONSORED LINKS
>
> Microcontrollers
> <http://groups.yahoo.com/gads?t=ms
> <http://groups.yahoo.com/gads? t=ms&k=Microcontrollers&w1=Microcontroller> > &k=Microcontrollers&w1=Microcontroller
> s&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&w
5= >
8085+microprocessor&c=5&s0&.sig=OPqm0ilH6VyGn-geZ0nNwA>
>
> Microprocessor
> <http://groups.yahoo.com/gads?t=ms
> <http://groups.yahoo.com/gads? t=ms&k=Microprocessor&w1=Microcontrollers&> >
&k=Microprocessor&w1=Microcontrollers&
> w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&w5=
80 >
85+microprocessor&c=5&s0&.sig93hF7rArBsrPQJltQ_w>
>
> Intel microprocessors
> <http://groups.yahoo.com/gads?t=ms
> <http://groups.yahoo.com/gads? t=ms&k=Intel+microprocessors&w1=Microcontr> > &k=Intel+microprocessors&w1=Microcontr
> ollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontroll
er >
s&w585+microprocessor&c=5&s0&.sigrTtKaQUw-Vd0BgTdDmw>
>
> Pic microcontrollers
> <http://groups.yahoo.com/gads?t=ms
> <http://groups.yahoo.com/gads? t=ms&k=Pic+microcontrollers&w1=Microcontro> > &k=Pic+microcontrollers&w1=Microcontro
> llers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrolle
rs >
&w585+microprocessor&c=5&s0&.sig=iYT6za1gT3-VT1hwIylDpw>
>
> 8085 microprocessor
> <http://groups.yahoo.com/gads?t=ms
> <http://groups.yahoo.com/gads? t=ms&k85+microprocessor&w1=Microcontrol> > &k85+microprocessor&w1=Microcontrol
> lers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontroller
s& >
w585+microprocessor&c=5&s0&.sig=PhYMBsCkQptYbazQFyNujQ
> _____
>
> > .
>
> _____
>
>
> ---------------------------------
> > Terms of Service.
>
> _____
>
>
SPONSORED LINKS
> Where can I get a copy of the Keil port of the rtos?
All the official ports are in the main download. See the Keil port doc
page (http://www.freertos.org/portlpckeil.html) for information on the
Keil port,and the source code organisation page
(http://www.freertos.org/a00017.html) for information on understanding
the files in the download (of which only a few are required for each
port and the rest can be deleted).
These are directly links so you will not see the menu frame. If you
want to see the menu frame go directly to http://www.FreeRTOS.org
Regards.
Reply by lehighuboy●September 16, 20052005-09-16
Dan,
Where can I get a copy of the Keil port of the rtos?
Thanks, Garrett
--- In lpc2000@lpc2..., "Dan Beadle" <dan.beadle@i...> wrote: > Thanks for pointing this out. The credentials were
temporarily disabled. > You should be able to get in now. The link should
be
>
> ftp::/ftp.inclinesoftworks.com if using IE, or just ftp.inclinesoftworks.com > <ftp://ftp.inclinesoftworks.com/> if using
ftp.com <ftp://ftp.com/>
> command line
>
> Dan
>
> _____
>
> From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On Behalf Of > Rock Dubois
> Sent: Thursday, September 15, 2005 8:30 PM
> To: lpc2000@lpc2...
> Subject: RE: [lpc2000] Re: LPC2138 and FreeRTOS
>
> Dan,
>
> I tried to download it from your ftp site but it didn't let me in. I tried > again but still not able to login.
>
> Yvon.
> Dan Beadle <dan.beadle@i...> wrote:
> I have just posted FreeRTOS Version 3.20 for IAR/ARM on my website
> ftp://inclinesoftworks.com <ftp://inclinesoftworks.com/> Use UserName > incline9_cust and pw freertos.
>
> This version of FreeRTOS has been adapted to IAR/ARM. (Using Version
> 4.30a of WARM). It works with MCB2100 Eval Board. It is adapted from > the Keil and SAM versions of the RTOS.
>
> If you have questions, you can contact me..
>
> Dan Beadle
>
> _____
>
> From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On Behalf > Of charlesgrenz
> Sent: Wednesday, August 24, 2005 3:39 PM
> To: lpc2000@lpc2...
> Subject: [lpc2000] Re: LPC2138 and FreeRTOS
>
> Hi Dan,
>
> Did you find the port from gcc to IAR difficult? I am using IAR and > I was looking at the LPC2106 gcc version and
porting that to the IAR
> 2106.
>
> Thanks,
> Charles
>
> --- In lpc2000@lpc2..., "Dan Beadle" <dan.beadle@i...> wrote: > > I did an early port of this to the IAR tool
chain. It took a while to > > get my mind around all the files, but, in
truth, it is quite small and > > easy to work with. The documentation is only
available online. I
> would
> > prefer a PDF to a web page, but that is a nit.
> >
> >
> >
> > I am using FreeRTOS on several projects. I like the following
> features:
> >
> >
> >
> > - Lean (small footprint, only the features I need.)
> >
> > - Evolving (almost too many code drops. I am giving up on
> > chasing changes)
> >
> > - Tractable. I got my mind around the entire code base,
> because
> > it is so small
> >
> >
> >
> > In the past, deeply embedded projects often would not use any RTOS. > This
> > brings true tasking to my systems without the overhead and cost of
> WinCE
> > or Linux. I considered uCOS, but this package does all that I need > from
> > uCOS. And the price is right.
> >
> >
> >
> > _____
> >
> > From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
> Behalf
> > Of Peter Homann
> > Sent: Wednesday, August 24, 2005 5:15 AM
> > To: lpc2000@lpc2...
> > Subject: [lpc2000] LPC2138 and FreeRTOS
> >
> >
> >
> > Hi,
> >
> > I'm looking at using FreeRTOS on a LPC2138 based project. Does
anyone > > have any opinions, tips or experiences they
could share on how
> > successful this combination is.
> >
> > Thanks in advance.
> >
> > Cheers,
> >
> > Peter.
> > --
> > ------------------------------
> > Web: www.homanndesigns.com
> > email: homann@h...
> > Phone: +61 421 601 665
> > www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
> > www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
> >
> >
> >
> > _____
> >
> > > .
> >
> >
> >
> > _____
> >
> >
> >
>
> SPONSORED LINKS
>
> Microcontrollers
> <http://groups.yahoo.com/gads?t=ms
> <http://groups.yahoo.com/gads? t=ms&k=Microcontrollers&w1=Microcontroller> > &k=Microcontrollers&w1=Microcontroller
> s&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&w
5= >
8085+microprocessor&c=5&s0&.sig=OPqm0ilH6VyGn-geZ0nNwA>
>
> Microprocessor
> <http://groups.yahoo.com/gads?t=ms
> <http://groups.yahoo.com/gads? t=ms&k=Microprocessor&w1=Microcontrollers&> >
&k=Microprocessor&w1=Microcontrollers&
> w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&w5=
80 >
85+microprocessor&c=5&s0&.sig93hF7rArBsrPQJltQ_w>
>
> Intel microprocessors
> <http://groups.yahoo.com/gads?t=ms
> <http://groups.yahoo.com/gads? t=ms&k=Intel+microprocessors&w1=Microcontr> > &k=Intel+microprocessors&w1=Microcontr
> ollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontroll
er >
s&w585+microprocessor&c=5&s0&.sigrTtKaQUw-Vd0BgTdDmw>
>
> Pic microcontrollers
> <http://groups.yahoo.com/gads?t=ms
> <http://groups.yahoo.com/gads? t=ms&k=Pic+microcontrollers&w1=Microcontro> > &k=Pic+microcontrollers&w1=Microcontro
> llers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrolle
rs >
&w585+microprocessor&c=5&s0&.sig=iYT6za1gT3-VT1hwIylDpw>
>
> 8085 microprocessor
> <http://groups.yahoo.com/gads?t=ms
> <http://groups.yahoo.com/gads? t=ms&k85+microprocessor&w1=Microcontrol> > &k85+microprocessor&w1=Microcontrol
> lers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontroller
s& >
w585+microprocessor&c=5&s0&.sig=PhYMBsCkQptYbazQFyNujQ
> _____
>
> > .
>
> _____
>
>
> ---------------------------------
> > Terms of Service.
>
> _____
>
>
Reply by Dan Beadle●September 16, 20052005-09-16
Thanks for pointing this out. The credentials were temporarily disabled.
You should be able to get in now. The link should be
From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On Behalf Of
Rock Dubois
Sent: Thursday, September 15, 2005 8:30 PM
To: lpc2000@lpc2...
Subject: RE: [lpc2000] Re: LPC2138 and FreeRTOS
Dan,
I tried to download it from your ftp site but it didn't let me in. I
tried
again but still not able to login.
Yvon.
Dan Beadle <dan.beadle@dan....> wrote:
I have just posted FreeRTOS Version 3.20 for IAR/ARM on my website ftp://inclinesoftworks.com <ftp://inclinesoftworks.com/> Use UserName
incline9_cust and pw freertos.
This version of FreeRTOS has been adapted to IAR/ARM. (Using Version
4.30a of WARM). It works with MCB2100 Eval Board. It is adapted from
the Keil and SAM versions of the RTOS.
If you have questions, you can contact me..
Dan Beadle
_____
From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On Behalf
Of charlesgrenz
Sent: Wednesday, August 24, 2005 3:39 PM
To: lpc2000@lpc2...
Subject: [lpc2000] Re: LPC2138 and FreeRTOS
Hi Dan,
Did you find the port from gcc to IAR difficult? I am using IAR and
I was looking at the LPC2106 gcc version and porting that to the IAR
2106.
Thanks,
Charles
--- In lpc2000@lpc2..., "Dan Beadle" <dan.beadle@i...> wrote: > I did an early port of this to the IAR tool chain.
It took a while to
> get my mind around all the files, but, in truth, it is quite small and
> easy to work with. The documentation is only available online. I would > prefer a PDF to a web page, but that is a nit.
>
> I am using FreeRTOS on several projects. I like the following features:
> - Lean (small footprint, only the features I need.)
>
> - Evolving (almost too many code drops. I am giving up on
> chasing changes)
>
> - Tractable. I got my mind around the entire code base, because > it is so small
>
> In the past, deeply embedded projects often would not use any RTOS. This > brings true tasking to my systems without the
overhead and cost of WinCE > or Linux. I considered uCOS, but this package does
all that I need from > uCOS. And the price is right.
>
> _____
>
> From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On Behalf > Of Peter Homann
> Sent: Wednesday, August 24, 2005 5:15 AM
> To: lpc2000@lpc2...
> Subject: [lpc2000] LPC2138 and FreeRTOS
>
> Hi,
>
> I'm looking at using FreeRTOS on a LPC2138 based project. Does anyone
> have any opinions, tips or experiences they could share on how
> successful this combination is.
>
> Thanks in advance.
>
> Cheers,
>
> Peter.
> --
> ------------------------------
> Web: www.homanndesigns.com
> email: homann@h...
> Phone: +61 421 601 665
> www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
> www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
>
> _____
>
> > .
>
> _____
>
>
--------------------------------- > Terms of Service.
_____
Reply by Rock Dubois●September 16, 20052005-09-16
Dan,
I tried to download it from your ftp site but it didn't let me in. I tried
again but still not able to login.
Yvon.
Dan Beadle <dan.beadle@dan....> wrote:
I have just posted FreeRTOS Version 3.20 for IAR/ARM on my website ftp://inclinesoftworks.com <ftp://inclinesoftworks.com/> Use UserName
incline9_cust and pw freertos.
This version of FreeRTOS has been adapted to IAR/ARM. (Using Version
4.30a of WARM). It works with MCB2100 Eval Board. It is adapted from
the Keil and SAM versions of the RTOS.
If you have questions, you can contact me..
Dan Beadle
_____
From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On Behalf
Of charlesgrenz
Sent: Wednesday, August 24, 2005 3:39 PM
To: lpc2000@lpc2...
Subject: [lpc2000] Re: LPC2138 and FreeRTOS
Hi Dan,
Did you find the port from gcc to IAR difficult? I am using IAR and
I was looking at the LPC2106 gcc version and porting that to the IAR
2106.
Thanks,
Charles
--- In lpc2000@lpc2..., "Dan Beadle" <dan.beadle@i...> wrote: > I did an early port of this to the IAR tool chain.
It took a while to
> get my mind around all the files, but, in truth, it is quite small and
> easy to work with. The documentation is only available online. I would > prefer a PDF to a web page, but that is a nit.
>
> I am using FreeRTOS on several projects. I like the following features:
> - Lean (small footprint, only the features I need.)
>
> - Evolving (almost too many code drops. I am giving up on
> chasing changes)
>
> - Tractable. I got my mind around the entire code base, because > it is so small
>
> In the past, deeply embedded projects often would not use any RTOS. This > brings true tasking to my systems without the
overhead and cost of WinCE > or Linux. I considered uCOS, but this package does
all that I need from > uCOS. And the price is right.
>
> _____
>
> From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On Behalf > Of Peter Homann
> Sent: Wednesday, August 24, 2005 5:15 AM
> To: lpc2000@lpc2...
> Subject: [lpc2000] LPC2138 and FreeRTOS
>
> Hi,
>
> I'm looking at using FreeRTOS on a LPC2138 based project. Does anyone
> have any opinions, tips or experiences they could share on how
> successful this combination is.
>
> Thanks in advance.
>
> Cheers,
>
> Peter.
> --
> ------------------------------
> Web: www.homanndesigns.com
> email: homann@h...
> Phone: +61 421 601 665
> www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
> www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
>
> _____
>
> > .
>
> _____
>
>
---------------------------------
YAHOO! GROUPS LINKS
---------------------------------
---------------------------------
Yahoo! for Good
Click here to donate to the Hurricane Katrina relief effort.
Reply by Rock Dubois●September 16, 20052005-09-16
Dan,
I tried to download it from your ftp site but it didn't let me in. I tried
again but still not able to login.
Yvon.
Dan Beadle <dan.beadle@dan....> wrote:
I have just posted FreeRTOS Version 3.20 for IAR/ARM on my website ftp://inclinesoftworks.com <ftp://inclinesoftworks.com/> Use UserName
incline9_cust and pw freertos.
This version of FreeRTOS has been adapted to IAR/ARM. (Using Version
4.30a of WARM). It works with MCB2100 Eval Board. It is adapted from
the Keil and SAM versions of the RTOS.
If you have questions, you can contact me..
Dan Beadle
_____
From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On Behalf
Of charlesgrenz
Sent: Wednesday, August 24, 2005 3:39 PM
To: lpc2000@lpc2...
Subject: [lpc2000] Re: LPC2138 and FreeRTOS
Hi Dan,
Did you find the port from gcc to IAR difficult? I am using IAR and
I was looking at the LPC2106 gcc version and porting that to the IAR
2106.
Thanks,
Charles
--- In lpc2000@lpc2..., "Dan Beadle" <dan.beadle@i...> wrote: > I did an early port of this to the IAR tool chain.
It took a while to
> get my mind around all the files, but, in truth, it is quite small and
> easy to work with. The documentation is only available online. I would > prefer a PDF to a web page, but that is a nit.
>
> I am using FreeRTOS on several projects. I like the following features:
> - Lean (small footprint, only the features I need.)
>
> - Evolving (almost too many code drops. I am giving up on
> chasing changes)
>
> - Tractable. I got my mind around the entire code base, because > it is so small
>
> In the past, deeply embedded projects often would not use any RTOS. This > brings true tasking to my systems without the
overhead and cost of WinCE > or Linux. I considered uCOS, but this package does
all that I need from > uCOS. And the price is right.
>
> _____
>
> From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On Behalf > Of Peter Homann
> Sent: Wednesday, August 24, 2005 5:15 AM
> To: lpc2000@lpc2...
> Subject: [lpc2000] LPC2138 and FreeRTOS
>
> Hi,
>
> I'm looking at using FreeRTOS on a LPC2138 based project. Does anyone
> have any opinions, tips or experiences they could share on how
> successful this combination is.
>
> Thanks in advance.
>
> Cheers,
>
> Peter.
> --
> ------------------------------
> Web: www.homanndesigns.com
> email: homann@h...
> Phone: +61 421 601 665
> www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
> www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
>
> _____
>
> > .
>
> _____
>
>
---------------------------------
YAHOO! GROUPS LINKS
---------------------------------
---------------------------------
Yahoo! for Good
Click here to donate to the Hurricane Katrina relief effort.
Reply by Dan Beadle●September 3, 20052005-09-03
Thanks. I tried to strip the release down to the minimal size... I
missed a couple files. I did another test and the build is successful
on my machine.
Dan
_____
From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On Behalf
Of Peter Homann
Sent: Saturday, September 03, 2005 1:20 AM
To: lpc2000@lpc2...
Subject: Re: [lpc2000] Re: LPC2138 and FreeRTOS
Hi Dan,
I downloaded the port and tried to make it. Came up with the following
error. :-) The file does not exist?
Fatal Error[Pe005]: could not open source file
"C:\FreeRTOS_3.20\Source\portable\MemMang\heap_1.c"
Cheers,
Peter.
Dan Beadle wrote: > I have just posted FreeRTOS Version 3.20 for
IAR/ARM on my website
> ftp://inclinesoftworks.com <ftp://inclinesoftworks.com/> Use UserName > incline9_cust and pw freertos.
>
> This version of FreeRTOS has been adapted to IAR/ARM. (Using Version
> 4.30a of WARM). It works with MCB2100 Eval Board. It is adapted from
> the Keil and SAM versions of the RTOS.
>
> If you have questions, you can contact me..
>
> Dan Beadle
>
> _____
>
> From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On Behalf > Of charlesgrenz
> Sent: Wednesday, August 24, 2005 3:39 PM
> To: lpc2000@lpc2...
> Subject: [lpc2000] Re: LPC2138 and FreeRTOS
>
> Hi Dan,
>
> Did you find the port from gcc to IAR difficult? I am using IAR and
> I was looking at the LPC2106 gcc version and porting that to the IAR
> 2106.
>
> Thanks,
> Charles
>
> --- In lpc2000@lpc2..., "Dan Beadle" <dan.beadle@i...>
wrote:
>
>>I did an early port of this to the IAR tool chain. It took a while to
>>get my mind around all the files, but, in truth, it is quite small
and
>>easy to work with. The documentation is only available online. I
>
> would
>
>>prefer a PDF to a web page, but that is a nit.
>>
>>
>>
>>I am using FreeRTOS on several projects. I like the following
>
> features:
>
>>
>>
>>- Lean (small footprint, only the features I need.)
>>
>>- Evolving (almost too many code drops. I am giving up on
>>chasing changes)
>>
>>- Tractable. I got my mind around the entire code base,
>
> because
>
>>it is so small
>>
>>
>>
>>In the past, deeply embedded projects often would not use any RTOS.
>
> This
>
>>brings true tasking to my systems without the overhead and cost of
>
> WinCE
>
>>or Linux. I considered uCOS, but this package does all that I need
>
> from
>
>>uCOS. And the price is right.
>>
>>
>>
>> _____
>>
>>From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
>
> Behalf
>
>>Of Peter Homann
>>Sent: Wednesday, August 24, 2005 5:15 AM
>>To: lpc2000@lpc2...
>>Subject: [lpc2000] LPC2138 and FreeRTOS
>>
>>
>>
>>Hi,
>>
>>I'm looking at using FreeRTOS on a LPC2138 based project. Does
anyone
>>have any opinions, tips or experiences they could share on how
>>successful this combination is.
>>
>>Thanks in advance.
>>
>>Cheers,
>>
>>Peter.
>>--
>>------------------------------
>>Web: www.homanndesigns.com
>>email: homann@h...
>>Phone: +61 421 601 665
>>www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
>>www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
>>
>>
>>
>> _____
>>
>>> .
>>
>>
>>
>> _____
>>
>>
>>
>
>
> SPONSORED LINKS
>
> Microcontrollers
> <http://groups.yahoo.com/gads?t=ms&k=Microcontrollers&w1=Microcontroller > s&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&w5= >
8085+microprocessor&c=5&s0&.sig=OPqm0ilH6VyGn-geZ0nNwA>
>
> Microprocessor
> <http://groups.yahoo.com/gads?t=ms&k=Microprocessor&w1=Microcontrollers& > w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&w5 >
85+microprocessor&c=5&s0&.sig93hF7rArBsrPQJltQ_w>
>
> Intel microprocessors
> <http://groups.yahoo.com/gads?t=ms&k=Intel+microprocessors&w1=Microcontr > ollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontroller >
s&w585+microprocessor&c=5&s0&.sigrTtKaQUw-Vd0BgTdDmw>
>
> Pic microcontrollers
> <http://groups.yahoo.com/gads?t=ms&k=Pic+microcontrollers&w1=Microcontro > llers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers >
&w585+microprocessor&c=5&s0&.sig=iYT6za1gT3-VT1hwIylDpw>
>
> 8085 microprocessor
> <http://groups.yahoo.com/gads?t=ms&k85+microprocessor&w1=Microcontrol > lers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers& >
w585+microprocessor&c=5&s0&.sig=PhYMBsCkQptYbazQFyNujQ
> _____
>
> > .
>
> _____
>
> > .
_____
