Hi Grant,
Thank you for the link. I'm sure they'll be useful for me in the near
future. I've figured out how to enable it. I had to use the full
featured SOPC ptf file.
Shirley
On Dec 12, 3:21 pm, Grant Edwards <gra...@visi.com> wrote:
> On 2007-12-12, S <smayad...@gmail.com> wrote:
>
> > I'm trying to configure eCos and I have enabled the Hardware
> >SerialDeviceDriveroption. However theAlteraAvalonUART
> >serialdevicedriveris grayed out. It means that thedriver
> > for thisUARTserialdeviceis disabled, doesn't it? Any
> > suggestions on how to enable this? Thanks in advance.
>
> You'll have much better luck asking this question on the eCos
> mailing list.
>
> http://ecos.sourceware.org/intouch.htmlhttp://dir.gmane.org/gmane.os.ecos.general
>
> You'll also have to provide more information (e.g. what target
> you're using).
>
> --
> Grant Edwards grante Yow! I've read SEVEN
> at MILLION books!!
> visi.com
Reply by Grant Edwards●December 12, 20072007-12-12
On 2007-12-12, S <smayadewi@gmail.com> wrote:
> I'm trying to configure eCos and I have enabled the Hardware
> Serial Device Driver option. However the Altera Avalon UART
> serial device driver is grayed out. It means that the driver
> for this UART serial device is disabled, doesn't it? Any
> suggestions on how to enable this? Thanks in advance.
Hi all,
I'm trying to configure eCos and I have enabled the Hardware Serial
Device Driver option. However the Altera Avalon UART serial device
driver is grayed out. It means that the driver for this UART serial
device is disabled, doesn't it? Any suggestions on how to enable this?
Thanks in advance.