<mikeotp@gmail.com> wrote in message
news:036d3717-0bce-4f26-bad2-6770882e9312@e25g2000prg.googlegroups.com...
> regards:
>
>
> If my system is like the followings:
> the system architecture is:
> http://0rz.tw/d83qm
>
> then do I need any control signal to control the "TX" "RX"?
>
> any positive suggestion is welcome.
> best regards to you all
>
> mike
That will work fine. Connect TX enable and RX enable to the appropriate
levels so they are permanently enabled.
Reply by ●December 15, 20072007-12-15
regards:
If my system is like the followings:
the system architecture is:
http://0rz.tw/d83qm
then do I need any control signal to control the "TX" "RX"?
any positive suggestion is welcome.
best regards to you all
mike