> Hello,
> I have an SBC powered by 5V DC with an LCD TFT with 2 CCFL lamps.
>
> so I'm searching for an inverter suitable for these.
>
> I need also some know-how on connecting inverters to power and so on.
> thanks
>
>
thanks !
however I need some tutorial to connect inverters to lcd and to a board
por powering .
Reply by Paul Carpenter●December 26, 20072007-12-26
"Dav79" <davdav79@yahoo.it> wrote in message
news:f6CdnUqLFoav9u_anZ2dnUVZ_qSonZ2d@giganews.com...
> Hello,
> I have an SBC powered by 5V DC with an LCD TFT with 2 CCFL lamps.
With such little information, it is difficult to help.
Most suppliers of LCD TFT screens can also supply inerters (though normally
for
operation from 12V).
> so I'm searching for an inverter suitable for these.
Ask the supplier of the LCD TFT screen.
> I need also some know-how on connecting inverters to power and so on.
> thanks
Not sure what you are asking there?
Make sure the high voltage side of the inverter is WELL insulated, as the
output
is sufficient to make burns in you skin due to volts and frequency of drive.
Done
that by accident too many times.
Nearly everything to do with LCD screens means that every manufacturer and
often
nearly every model from any manufacturer has different connectors, for the
video as
well as the backlights!
Reply by Dav79●December 26, 20072007-12-26
Hello,
I have an SBC powered by 5V DC with an LCD TFT with 2 CCFL lamps.
so I'm searching for an inverter suitable for these.
I need also some know-how on connecting inverters to power and so on.
thanks