second time as a candidate for the honour of a free
    passage, but it seems quite as likely that nothing less than
    kidnaping or forcible detention would induce men to run so great
    a risk. On arrival at Singapore the broker is again on the _qui
    vive_ to see that his captives do not jump into the sea, and as
    each coolie ship arrives at the wharf, a small force of police
    is in waiting to keep a space clear and prevent any attempt at
    escape, while the officers of the Protectorate board the ship,
    accompanied by a further force of marine police, for the purpose
    of inspecting the coolies. When permission is given to disembark,
    the unpaid passengers are made up into small parties and marched
    through the town to the depots under the escort of the brokers and
    several of their assistants, with much yelling and good deal of
    rough handling, and an occasional halt while a straggler or a
    would be runaway is brought back to the party. That the coolies
    are frequently successful in their attempts to escape is shown
    in the Report of the Chinese Protectorate, 160 being returned as
    'absconded either when landing or at depot' in Singapore, and 101
    at Penang, or about 1-3/4 per cent of the "unpaid passengers". On
    arrival at the depot, the coolies are

Hi,

Microchip PIC 18f8722 USART2 Interrupt is not working - I have USART1
working fine with interrupts but cannot get interrupt on usart2 - the
RC2IF interrupt flag never gets set although data is coming into the
rcreg2 register and i can read from it.


Is there any special considerations I need to take into account?
Global INT flag is enabled as well as all INTs on High priority.
Code
is exactly the same as that of usart1 but usart2 INT flag never gets
set?!


Any help greatly appreciated!


Thanks,


GI.