Reply by Grant Edwards●September 2, 20042004-09-02
On 2004-09-02, jah <jlara@wowway.com> wrote:
>
>> I am looking for a low-cost Motorola 9S12DP256 board with not too many
>> bells and whistles. All I need is the micro, the power supply
>> circuit, and BDM connector. The pins need to brought out to a
>> connector as well. Thanks in advance for the information.
>
> In case anyone is interested, I found a good low-cost (MiniDRAGON+ is
> under $100) at the following website:
>
> www.evbplus.com
Those look like pretty decent little boards at excellent
prices, and development tools are free since GCC supports
hc11/hc12, development tools are free.
I'm especially impressed that it comes with a bootloader and
debugger that _nobody_ wrote! Apparently it just evloved...
"The answer is that the MiniDRAGON+ will work with any
software tools and any BDMs, because the bootloader and the
D-bug12 are supplied by Motorola. We did not write them and
nobody wrote them."
--
Grant Edwards grante Yow! I own seven-eighths
at of all the artists in
visi.com downtown Burbank!
Reply by jah●September 2, 20042004-09-02
jlara@wowway.com (jah) wrote in message news:<a29c0e35.0408260654.4516ab90@posting.google.com>...
> Hello,
>
> I am looking for a low-cost Motorola 9S12DP256 board with not too many
> bells and whistles. All I need is the micro, the power supply
> circuit, and BDM connector. The pins need to brought out to a
> connector as well. Thanks in advance for the information.
In case anyone is interested, I found a good low-cost (MiniDRAGON+ is
under $100) at the following website:
www.evbplus.com
Reply by jah●August 26, 20042004-08-26
Hello,
I am looking for a low-cost Motorola 9S12DP256 board with not too many
bells and whistles. All I need is the micro, the power supply
circuit, and BDM connector. The pins need to brought out to a
connector as well. Thanks in advance for the information.