On Fri, 14 Mar 2008 09:14:02 GMT, "TT_Man" <Someone@ntlworld.com>
wrote:
>
>"Anton Erasmus" <nobody@spam.prevent.net> wrote in message
>news:q6sit3dv5erurktggb9gur3eimhejjabpk@4ax.com...
>> Hi,
>>
>> This is the first time I am venturing into flex PCB territory. The PCB
>> houses I normally use do not do flex PCBs. I am looking for
>> recommendations for companies that can do good quality double
>> sided flex PCBs at a good price. Since we are doing low quantities,
>> the NRE costs are very important.
>>
>> Thanks in advance
>>
>> Anton Erasmus
>>
>
>PcbCart.com in China. Used them lots of time for DS pth and had a quote for
>flexi .
I have been using them for normal PCBs. I have been very happy with
their quality and price. I did not realise they did flexi's as well. I
will give them a try.
Thanks
Anton
Reply by Anton Erasmus●March 14, 20082008-03-14
On Thu, 13 Mar 2008 18:38:21 +0000 (UTC), Uwe Bonnes
<bon@hertz.ikp.physik.tu-darmstadt.de> wrote:
>Anton Erasmus <nobody@spam.prevent.net> wrote:
>> Hi,
>
>> This is the first time I am venturing into flex PCB territory. The PCB
>> houses I normally use do not do flex PCBs. I am looking for
>> recommendations for companies that can do good quality double
>> sided flex PCBs at a good price. Since we are doing low quantities,
>> the NRE costs are very important.
>
>www.leiton.de has an online calculator.
>
>For a test, I did 10 pcs 100x160mm 0.15 Polyimid, 2-sides 6mil, no silk
>screen/E-Test/Stiffener and got to little more than 500 Euros.
>
>Don't know about oders form SA(if I remember right ;-)
Their site seems to be german only. Unfortunately my german is not
good enough for such a technical matter.
Thanks
Anton
Reply by TT_Man●March 14, 20082008-03-14
"Anton Erasmus" <nobody@spam.prevent.net> wrote in message
news:q6sit3dv5erurktggb9gur3eimhejjabpk@4ax.com...
> Hi,
>
> This is the first time I am venturing into flex PCB territory. The PCB
> houses I normally use do not do flex PCBs. I am looking for
> recommendations for companies that can do good quality double
> sided flex PCBs at a good price. Since we are doing low quantities,
> the NRE costs are very important.
>
> Thanks in advance
>
> Anton Erasmus
>
PcbCart.com in China. Used them lots of time for DS pth and had a quote for
flexi .
Reply by Uwe Bonnes●March 13, 20082008-03-13
Anton Erasmus <nobody@spam.prevent.net> wrote:
> Hi,
> This is the first time I am venturing into flex PCB territory. The PCB
> houses I normally use do not do flex PCBs. I am looking for
> recommendations for companies that can do good quality double
> sided flex PCBs at a good price. Since we are doing low quantities,
> the NRE costs are very important.
www.leiton.de has an online calculator.
For a test, I did 10 pcs 100x160mm 0.15 Polyimid, 2-sides 6mil, no silk
screen/E-Test/Stiffener and got to little more than 500 Euros.
Don't know about oders form SA(if I remember right ;-)
--
Uwe Bonnes bon@elektron.ikp.physik.tu-darmstadt.de
Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt
--------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------
Reply by Anton Erasmus●March 13, 20082008-03-13
Hi,
This is the first time I am venturing into flex PCB territory. The PCB
houses I normally use do not do flex PCBs. I am looking for
recommendations for companies that can do good quality double
sided flex PCBs at a good price. Since we are doing low quantities,
the NRE costs are very important.
Thanks in advance
Anton Erasmus