I'm just going through the datasheet. Sometimes an extra pair of eyes
helps...
Read the fuses back and make sure bits 4, 1, 0 are set to 1, 0, 1. And
you probably have to disable A/D with: CMCON=7, ANSEL=0.
Mike
--- In piclist@picl..., "rtstofer" <rstofer@p...> wrote:
> Has anyone successfully sent Fosc/4 to RA6 when
using the internal RC
> oscillator at 8 MHz? I have tried a lot of combinations of Fosc and
> _CONFIG1 but so far, no output.
>
> I thought I did a pretty good job of reading the datasheet but still,
> no output; I must have missed something.