>On May 14, 5:07 am, "Joel" <joelben...@gmail.com> wrote:
>> Is there a way for me to set the trace widths before I use the
auto-router?
>> It seems to autoroute with 5mil traces no matter what.
>>
>> Thanks in advance.
>
>Since no one else has chimed in, I'll offer this - I haven't used
>OrCad since the DOS days, but in most CAD packages you set the desired
>routing trace width (or range) in the Design Rules.
>
>HTH
>
>Bob
>
Thank you, I did manage to figure it out. For anyone else who is
wondering this: The width needs to be set in the "Alegro Constraint
Manager."
Reply by Bob●May 15, 20082008-05-15
On May 14, 5:07 am, "Joel" <joelben...@gmail.com> wrote:
> Is there a way for me to set the trace widths before I use the auto-router?
> It seems to autoroute with 5mil traces no matter what.
>
> Thanks in advance.
Since no one else has chimed in, I'll offer this - I haven't used
OrCad since the DOS days, but in most CAD packages you set the desired
routing trace width (or range) in the Design Rules.
HTH
Bob
Reply by Joel●May 14, 20082008-05-14
Is there a way for me to set the trace widths before I use the auto-router?
It seems to autoroute with 5mil traces no matter what.
Thanks in advance.