> I found this link only mentions the lpc2148: > http://www.standardics.philips.com/support/techdocs/microcontrollers/pdf/ > errata_lpc2148.pdf > off the page: > http://www.standardics.philips.com/support/techdocs/microcontrollers/?scope=LPC2000 > But it seems very short for an errata sheet. > > Hope this helps, > Danish Yes thanks!!

An Engineer's Guide to the LPC2100 Series

> the LPC2148 Errata Sheet is here: > http://www.standardics.philips.com/support/techdocs/microcontrollers/ > pdf/errata_lpc2148.pdf > It is not identical to the Errata Sheet of the LPC2138 because many > bugs were fixed! > > In general please use this link as a start for LPC2000 technical > documents: > http://www.standardics.philips.com/products/lpc2000/all/ > Great I will! Thanks!!

Joel, the LPC2148 Errata Sheet is here: http://www.standardics.philips.com/support/techdocs/microcontrollers/ pdf/errata_lpc2148.pdf It is not identical to the Errata Sheet of the LPC2138 because many bugs were fixed! In general please use this link as a start for LPC2000 technical documents: http://www.standardics.philips.com/products/lpc2000/all/ Robert --- In lpc2000@lpc2..., "Joel Winarske" <joelw@i...> wrote: > > Can Phillips apps confirm if the errata for the LPC2148 is identical to the > LPC2138? This link downloads the errata sheet for the LPC2138: > http://semiconductors.philips.com/acrobat_download/erratasheets/2148. pdf > This document only refers to the LPC2138. I don't feel comfortable assuming > this is the right errata sheet. > > My target application requires six compare positive edge interrupts, and six > timer match interrupts. Three pairs for each timer. I plan to implement > workaround as suggested in the errata sheet. > > Is there a timetable for a revision that fixes the timer problems? > Regards, > Joel Winarske >

Hi Joel, I found this link only mentions the lpc2148: http://www.standardics.philips.com/support/techdocs/microcontrollers/pdf/ errata_lpc2148.pdf off the page: http://www.standardics.philips.com/support/techdocs/microcontrollers/?scope=LPC2000 But it seems very short for an errata sheet. Hope this helps, Danish --- In lpc2000@lpc2..., "Joel Winarske" <joelw@i...> wrote: > > Can Phillips apps confirm if the errata for the LPC2148 is identical to the > LPC2138? This link downloads the errata sheet for the LPC2138: > http://semiconductors.philips.com/acrobat_download/erratasheets/2148.pdf > This document only refers to the LPC2138. I don't feel comfortable assuming > this is the right errata sheet.

Can Phillips apps confirm if the errata for the LPC2148 is identical to the LPC2138? This link downloads the errata sheet for the LPC2138: http://semiconductors.philips.com/acrobat_download/erratasheets/2148.pdf This document only refers to the LPC2138. I don't feel comfortable assuming this is the right errata sheet. My target application requires six compare positive edge interrupts, and six timer match interrupts. Three pairs for each timer. I plan to implement workaround as suggested in the errata sheet. Is there a timetable for a revision that fixes the timer problems? Regards, Joel Winarske