On Wed, 25 Jun 2008 06:22:56 -0500, "bm_seo" <brian.murphy.seo@gmail.com> wrote:
>(Apologies if posted twice, couldn't find message)
>
>I am trying to get Flash write working on LPC2138 with no sucess.
>Code is below. Any help appriciated.
>
>typedef void (*IAP)(unsigned int [],unsigned int []);
>IAP iap_bypointer;
>void iap_byfunction (unsigned *cmd,unsigned *rslt,unsigned entry);
>
>unsigned int command[5];
>unsigned int result[5];
>char Ram_Arry[512] = "Hello World";
>char *Ram_Pointer;
>void flash_write(void)
Is this procedure being executed from RAM?
If not, that is your problem.
Reply by Boudewijn Dijkstra●June 25, 20082008-06-25
Op Wed, 25 Jun 2008 13:22:56 +0200 schreef bm_seo
<brian.murphy.seo@gmail.com>:
> I am trying to get Flash write working on LPC2138 with no sucess.
> Code is below. Any help appriciated.
What parts fail and what parts succeed and how did you determine that?
--
Gemaakt met Opera's revolutionaire e-mailprogramma:
http://www.opera.com/mail/
Reply by bm_seo●June 25, 20082008-06-25
(Apologies if posted twice, couldn't find message)
I am trying to get Flash write working on LPC2138 with no sucess.
Code is below. Any help appriciated.
typedef void (*IAP)(unsigned int [],unsigned int []);
IAP iap_bypointer;
void iap_byfunction (unsigned *cmd,unsigned *rslt,unsigned entry);
unsigned int command[5];
unsigned int result[5];
char Ram_Arry[512] = "Hello World";
char *Ram_Pointer;
void flash_write(void)
{
unsigned char index;
iap_bypointer = (IAP) 0x7FFFFFF1; //set IAP entry address in function
pointer
//Ram_Pointer = &Ram_Arry[0];
Ram_Pointer = 0x40005000;
for (index = 0; index<0x0B; index++) //Copy data to be written to flash
into the RAM
{
*Ram_Pointer = Ram_Arry[index];
Ram_Pointer++;
}
//Ram_Pointer = &Ram_Arry[0];
command[0] = 0x36; //command code for "Read part ID"
iap_bypointer(command,result);
command[0] = 50; //Prepare sector ten for a write operayion
command[1] = 10;
command[2] = 10;
iap_bypointer(command,result);
command[0] = 52; //erase sector ten
command[1] = 10;
command[2] = 10;
command[3] = 60000; //Cclk == 60Mhz Pll is disabled in startup code
iap_bypointer(command,result);
command[0] = 50; //Prepare sector ten for a write operayion
command[1] = 10;
command[2] = 10;
iap_bypointer(command,result);
command[0] = 51; //write 512 bytes from address 0x40005000
command[1] = 0x00018000; //to 0x00018000 in flash memory;
command[2] = 0x40005000;
command[3] = 512;
command[4] = 60000;
while(1)
{
;
}
}