<ravi7k1@gmail.com> wrote in message
news:d8fb10b9-5931-4d19-a489-a0c0adeab2e0@k37g2000hsf.googlegroups.com...
> Hello,
>
> I am working on CAN-uVCCM (CAN - rs232 converter ) to convert CAN data
> from Bosch Radar (Node) to rs-232. I am using Tera Term terminal
> instead of Hyperterminal. I am getting the output data but I am not
> getting the output CAN messages data that I wanted from a node (Bosch
> Radar).
>
> My questions are
> 1. How can I send CAN messages as Input to the CAN network in command
> mode, so that I can get the messages that I wanted from a particular
> node (Bosch Radar) ?
> 2. Are there any commands to send the CAN messages as Input to the CAN
> Network in command mode ??
>
> Any help is really appreciated. Thanks for your time.
>
> Thanks
> Ravi
Hello Ravi,
This device would not be my first choice for serious work - you need
something that you can program or script easily.
Page 16 of the manual tells you how to send a message.
Michael Kellett
Reply by ●July 9, 20082008-07-09
Hello,
I am working on CAN-uVCCM (CAN - rs232 converter ) to convert CAN data
from Bosch Radar (Node) to rs-232. I am using Tera Term terminal
instead of Hyperterminal. I am getting the output data but I am not
getting the output CAN messages data that I wanted from a node (Bosch
Radar).
My questions are
1. How can I send CAN messages as Input to the CAN network in command
mode, so that I can get the messages that I wanted from a particular
node (Bosch Radar) ?
2. Are there any commands to send the CAN messages as Input to the CAN
Network in command mode ??
Any help is really appreciated. Thanks for your time.
Thanks
Ravi