Debug Connectors (JTAG/SWD)
JTAG and SWD debug connectors include standard 20-pin 0.1" headers, 10-pin 0.05" Cortex-M SWD footprints, pogo-pin adapters and shrouded keyed variants. These are used for in-circuit programming, boundary-scan, firmware debug, and automated test fixtures on development and production boards.
Parts (12 families, 12 parts)
FTDI, Future Technology Devices International Ltd
The FT2232H Mini Module is a USB-to-serial/FIFO development module that breaks out the high-speed FT2232H IC to a standard 0.1-inch pitch header format. It enables USB 2.0 Hi-Speed communication at 48...
J-Link EDU Mini
8.08.91
SEGSegger Microcontroller
The J-Link EDU Mini is a compact, cost-effective version of the industry-standard J-Link debug probe designed exclusively for non-commercial educational use. It provides full support for ARM Cortex-M ...
STLINK-V3MINIE
Active
STMicroelectronicsThe STLINK-V3MINIE is a portable, ultra-compact in-circuit debugger and programmer for STM32 microcontrollers. It features a high-speed USB 2.0 interface and supports JTAG, SWD, and Virtual COM port (...
J-Link PLUS
8.08.28
SEGSegger Microcontroller
The Segger J-Link PLUS (8.08.28) is a professional JTAG/SWD debug probe designed for ARM and RISC-V microcontrollers. It features high-speed USB 2.0 and Ethernet connectivity, providing a bridge betwe...
J-Link BASE Compact
8.19.00
SEGSegger Microcontroller
The J-Link BASE Compact is a professional-grade, reduced form factor debug probe designed for ARM and RISC-V microcontrollers. It provides a smaller footprint than the standard J-Link BASE while maint...
J-Link PLUS Compact
8.19.28
SEGSegger Microcontroller
The J-Link PLUS Compact is a professional JTAG/SWD debug probe designed for ARM and RISC-V microcontrollers. This compact version provides the full functionality of the standard J-Link PLUS, including...
MCHPMicrochip Technology
The ATPOWERDEBUGGER is a Microchip hardware debugger that combines in-circuit debugging/programming with power measurement for embedded development. It attaches to a target board and a host PC over US...
SparkFunThis 150mm (6-inch) ribbon cable features 10 conductors terminated with 2x5 female IDC connectors on both ends. It utilizes a 1.27mm (0.05-inch) pitch, making it specifically designed for modern high-...
Segger J-Trace PRO Cortex
8.20.00
SEGSegger Microcontroller
The Segger J-Trace PRO Cortex is a hardware debug and trace probe for ARM Cortex targets that combines J-Link debug functionality with high-speed instruction trace capture. It provides real-time non-i...
Atmel-ICE Adapter Kit
ATATMEL-ICE-ADPT
MCHPMicrochip Technology
The ATATMEL-ICE-ADPT is a specialized adapter kit designed for use with the Atmel-ICE debug probe. It provides the necessary physical interfaces to connect the programmer to various target board heade...
1.27mm 2x5 Pin Male PTH Header
PRT-15362
SparkFunThe PRT-15362 is a compact 10-position male pin header featuring a 1.27mm (0.050 inch) pitch in a 2x5 dual-row configuration. This specific footprint is the industry standard for JTAG and SWD programm...
SparkFun 2x5 Female Header (1.27mm)
PRT-15363
SparkFunThis is a compact 2x5 pin female through-hole header with a 1.27mm (0.050 inch) pitch. It is specifically designed to meet the standard footprint requirements for small-form-factor JTAG and SWD progra...
Browse Debug Connectors (JTAG/SWD) from our distributor partners:
Search Debug Connectors (JTAG/SWD)
