Industrial Communication
Robust industrial networking interfaces for vehicle manufacturing, diagnostics and industrial automation, including EtherCAT, Profinet, Modbus and RS‑485. Also find IO‑Link and industrial Ethernet modules for factory-floor integration and test systems.
Parts (50 families, 54 parts)
SN65HVD3082EDR
NRND
TITexas Instruments
The SN65HVD3082EDR is a low-power, half-duplex RS-485 transceiver designed for robust data transmission in industrial environments. It operates from a 5V supply and supports data rates up to 200 kbps....
MAX3485ESA+
NRND
ADIAnalog Devices Inc./Maxim Integrated
The MAX3485ESA+ is a 3.3V, half-duplex RS-485/RS-422 transceiver. It is designed for robust data transmission in industrial environments, offering features like current-limiting and thermal shutdown f...
MAX3485ESA+T
NRND
ADIAnalog Devices Inc./Maxim Integrated
The MAX3485ESA+T is a low-power, 10Mbps transceiver designed for RS-485 and RS-422 communication using a single 3.3V supply. This half-duplex device integrates one driver and one receiver into a compa...
ISO3082DWR
Active
TITexas Instruments
The ISO3082DWR is an isolated, half-duplex RS-485 and RS-422 transceiver designed for use in harsh industrial environments. It integrates a galvanic isolation layer that provides 50 kV/us typical tran...
1 variant
SI5338C-B-GMR
Active
Skyworks Solutions Inc.
The SI5338C-B-GMR is a high-performance, low-jitter clock generator capable of synthesizing any frequency on each of its four outputs. Utilizing Skyworks' MultiSynth technology, it provides 0 ppm freq...
Also available as:
SI5338C-B-GM
STM32F207VET6
Active
STMicroelectronicsThe STM32F207VET6 is a high-performance 32-bit microcontroller based on the ARM Cortex-M3 core running at 120MHz. It features 512KB of Flash memory and 128KB of RAM, specifically designed for applicat...
AM26C32IDR
Active
TITexas Instruments
The AM26C32IDR is a quadruple differential line receiver designed for balanced or unbalanced digital data transmission. It is optimized for RS-422 and RS-423 protocols, providing high common-mode reje...
FIN1019MTCX
Active
ONonsemi
The FIN1019MTCX is a 3.3V LVDS 1-bit high-speed transceiver designed for point-to-point data transmission at rates exceeding 400Mbps. It combines a single driver and a single receiver into a 14-pin TS...
FOD817B3SD
Active
ONonsemi
The FOD817B3SD is a single-channel phototransistor optocoupler designed to provide 5000Vrms electrical isolation between input and output stages. It consists of a gallium arsenide (GaAs) infrared emit...
MAX14934FAWE+
Active
ADIAnalog Devices Inc./Maxim Integrated
The MAX14934FAWE+ is a high-speed, four-channel digital isolator providing 5000Vrms of galvanic isolation between circuits. It utilizes capacitive coupling technology to transfer digital signals at da...
SI8641BD-B-IS
Active
Skyworks Solutions Inc.
The SI8641BD-B-IS is a high-performance, four-channel digital isolator from Skyworks Solutions providing 5000Vrms isolation. It supports data rates up to 150Mbps with a 3/1 channel directionality conf...
Skyworks Solutions Inc.
The Si8642AB-B-IS1 is a quad-channel digital isolator based on proprietary capacitive coupling technology, providing 2500Vrms isolation. It features a 2/2 channel configuration (two forward, two rever...
SM24CANB-02HTG
Active
Littelfuse Inc.
The SM24CANB-02HTG is a dual-channel bidirectional TVS diode array specifically designed to protect CAN bus lines from electrostatic discharge (ESD) and surge events. Housed in a standard SOT-23-3 pac...
TJA1051TK/3/2Z
Active
NXP USA Inc.The TJA1051TK/3/2Z is a high-speed CAN transceiver that provides an interface between a Controller Area Network (CAN) protocol controller and the physical two-wire CAN bus. It is specifically designed...
VOS618A-3X001T
Active
Vishay Semiconductor Opto Division
The VOS618A-3X001T is a low-power optoisolator featuring a GaAs infrared emitting diode optically coupled to a silicon planar phototransistor detector. Housed in a space-saving 4-pin SSOP package, it ...
TCAN1051HGVDRQ1
Active
TITexas Instruments
The TCAN1051HGVDRQ1 is an automotive-qualified (AEC-Q100) high-speed CAN transceiver that supports both classic CAN and CAN FD data rates up to 5 Mbps. This functional safety-capable device features a...
4N35-X009T
Active
Vishay Semiconductor Opto Division
The 4N35-X009T is a single-channel phototransistor optocoupler designed for high-voltage electrical isolation between input and output circuits. It features a gallium arsenide infrared LED optically c...
6N138-500E
Active
Broadcom Limited
The 6N138-500E is a high-gain optocoupler featuring an AlGaAs LED and an integrated high-gain photodetector. It utilizes a Darlington-connected output stage that provides extremely high current transf...
FOD817D300
Active
Fairchild Semiconductor
The FOD817D300 is a single-channel phototransistor optocoupler consisting of a gallium arsenide infrared emitting diode driving a silicon phototransistor. It provides a robust 5000Vrms isolation barri...
ISO7720FDWR
Active
TITexas Instruments
The ISO7720FDWR is a high-performance, dual-channel digital isolator providing 5000Vrms isolation voltage according to UL 1577. This device features a 100Mbps data rate and a high common-mode transien...
1 variant
LAN7500-ABZJ
Active
MCHPMicrochip Technology
The LAN7500-ABZJ is a high-performance USB 2.0 to 10/100/1000 Gigabit Ethernet bridge designed for high-bandwidth embedded applications. It integrates a 10/100/1000 Gigabit Ethernet PHY and a USB 2.0 ...
MAX14932FAWE+
Active
ADIAnalog Devices Inc./Maxim Integrated
The MAX14932FAWE+ is a high-speed, four-channel digital isolator designed to provide 2750Vrms of galvanic isolation between circuits. It features a 2/2 unidirectional channel configuration, allowing f...
MAX3232EESE+
Active
ADIAnalog Devices Inc./Maxim Integrated
The MAX3232EESE+ is a high-speed RS-232 transceiver that operates from a single 3.0V to 5.5V supply, making it compatible with both legacy 5V systems and modern low-voltage logic. It features two driv...
MCP2518FDT-E/QBB
Active
MCHPMicrochip Technology
The MCP2518FDT-E/QBB is a cost-effective, small-footprint CAN FD controller designed to interface with microcontrollers via a high-speed SPI interface. It allows for the addition of a CAN FD channel t...
SN65HVD230MDREP
Active
TITexas Instruments
The SN65HVD230MDREP is an enhanced product CAN transceiver designed for operation in harsh environments, featuring a controlled baseline and extended temperature range from -55 degC to 125 degC. It op...
SN65HVD230QDG4Q1
Active
TITexas Instruments
The SN65HVD230QDG4Q1 is an automotive-qualified CAN transceiver designed to interface a Controller Area Network (CAN) protocol controller with a physical differential bus. Operating from a 3.3V supply...
ST232BDR
Active
STMicroelectronicsThe ST232BDR is a dual-channel RS-232 transceiver designed for 5V systems, converting TTL/CMOS logic levels to RS-232 bipolar signals. It features an integrated charge pump that generates the necessar...
SparkFun ElectronicsThe SparkFun 10124 is a breakout board for the Sipex SP3485 RS-485 transceiver, designed to convert UART serial streams to the robust RS-485 differential signaling standard. It operates on a 3.3V supp...
ADM2482EBRWZ
Active
ADIAnalog Devices Inc.
The ADM2482EBRWZ is an integrated, isolated RS-422/RS-485 transceiver with a 2500Vrms isolation rating using Analog Devices iCoupler technology. It provides a 3-channel digital isolator and a differen...
CDSOT23-SM712
Active
Bourns Inc.
The CDSOT23-SM712 is a specialized Transient Voltage Suppressor (TVS) diode array designed specifically to protect RS-485 transceiver ports. It features asymmetrical voltage levels (12V and 7V) to mat...
DP83822IRHBR
Active
TITexas Instruments
The DP83822IRHBR is a high-performance 10/100 Mbps Ethernet Physical Layer (PHY) transceiver designed for industrial environments. It supports MII and RMII interfaces and operates from a wide supply r...
HCPL-0600-500E
Active
Broadcom Limited
The HCPL-0600-500E is a high-speed 10MBd optocoupler designed for digital logic isolation. It combines an AlGaAs LED with an integrated high-gain photodetector and an open-collector output featuring a...
HCPL-0601-500E
Active
Broadcom Limited
The HCPL-0601-500E is a single-channel 10MBd high-speed optocoupler designed for digital logic isolation. It utilizes an internal shield to provide high common-mode transient immunity (CMTI) of 10kV/u...
LAN8720AI-CP
Active
MCHPMicrochip Technology
The LAN8720AI-CP is a high-performance, small-footprint 10/100 Ethernet physical layer transceiver (PHY) with an RMII interface. It features flexPWR technology for reduced power consumption and an int...
LTV-354T
Active
Lite-On Inc.
The LTV-354T is a single-channel AC-input optoisolator featuring a transistor output in a compact 4-pin SOP package. It provides 3750Vrms of galvanic isolation, making it ideal for protecting sensitiv...
LTV-816S-TA1
Active
Lite-On Inc.
The LTV-816S-TA1 is a single-channel phototransistor optoisolator designed for signal isolation between high-voltage and low-voltage circuits. It provides a high isolation voltage of 5000Vrms and feat...
MAX202IDR
Active
TITexas Instruments
The MAX202IDR is a dual-channel RS-232 transceiver designed for 5V systems. It utilizes an internal charge pump with four external 0.1uF capacitors to generate RS-232 voltage levels from a single 5V s...
MAX3232CDR
Active
TITexas Instruments
The MAX3232CDR is a dual-channel RS-232 line driver and receiver designed for high-speed asynchronous communication between 3V to 5.5V logic and RS-232 serial ports. It utilizes a proprietary low-drop...
MAX3232ECPE+
Active
ADIAnalog Devices Inc./Maxim Integrated
The MAX3232ECPE+ is a dual-channel RS-232 transceiver designed to provide asynchronous communication interface between 3V to 5.5V logic and RS-232 voltage levels. It utilizes a proprietary low-dropout...
MCP2544WFDT-H/MNY
Active
MCHPMicrochip Technology
The MCP2544WFDT-H/MNY is a high-speed CAN FD transceiver designed for high-temperature automotive and industrial environments, supporting data rates up to 8Mbps. It serves as the physical interface be...
SFH619A-X007T
Active
Vishay Semiconductor Opto Division
The SFH619A-X007T is a high-voltage optocoupler featuring a GaAs infrared emitting diode optically coupled to a silicon Darlington phototransistor. This single-channel surface-mount isolator provides ...
Skyworks Solutions Inc.
The Si8641ED-B-IS is a high-performance, four-channel digital isolator based on Skyworks' proprietary capacitive-coupling technology. It provides 5000Vrms isolation with a 3/1 channel configuration (t...
SN75HVD12P
Active
TITexas Instruments
The SN75HVD12P is a low-power, half-duplex RS-485/RS-422 transceiver designed for 3.3V supply rails. This device features a single driver and receiver capable of data rates up to 1Mbps, making it suit...
SN75HVD3082EP
Active
TITexas Instruments
The SN75HVD3082EP is a low-power, half-duplex RS-485 transceiver designed for data rates up to 200kbps. It operates from a 5V supply and features an exceptionally low 0.4mA supply current, making it s...
ST1480ABDR
Active
STMicroelectronicsThe ST1480ABDR is a low-power, high-speed transceiver designed for RS-485 and RS-422 communication from a single 3.3V supply. It supports data rates up to 15Mbps while featuring robust ESD protection ...
1 variant
ST3232CDR
Active
STMicroelectronicsThe ST3232CDR is a low-power 3V to 5.5V RS-232 transceiver that provides two drivers and two receivers in a 16-SOIC package. It is designed to bridge the gap between low-voltage microcontrollers and t...
TCAN1051HGDR
Active
TITexas Instruments
The TCAN1051HGDR is a high-speed CAN transceiver that supports data rates up to 5Mbps in CAN FD networks. It features integrated bus fault protection up to +/-70V and is designed to interface between ...
THVD1450DGKR
Active
TITexas Instruments
The THVD1450DGKR is a high-speed, half-duplex RS-485 transceiver designed for robust data transmission in electrically noisy environments. It supports data rates up to 50Mbps and operates across a wid...
TJA1042TK/3/1J
Active
NXP USA Inc.The TJA1042TK/3/1J is a high-speed CAN transceiver that provides the interface between a Controller Area Network (CAN) protocol controller and the physical two-wire CAN bus. This specific variant feat...
TLT9251VLEXUMA1
Active
IFXInfineon Technologies
The TLT9251VLEXUMA1 is a high-speed CAN FD transceiver designed for automotive and industrial applications requiring data rates up to 5Mbps. It serves as the physical layer interface between a CAN pro...
Browse Industrial Communication from our distributor partners:
Search Industrial Communication
