CAN Bus
Find CAN bus transceivers, controllers and related PHY components for robust in-vehicle communication. Ideal for building and troubleshooting automotive networks including LIN nodes and FlexRay gateways used in ECUs and telematics systems.
Parts (26 families, 27 parts)
TJA1057T,118
Active
NXP USA Inc.The TJA1057T,118 is a high-speed CAN transceiver that acts as the physical interface between a Controller Area Network protocol controller and the physical two-wire bus. It is specifically designed fo...
ATA6561-GAQW-N
Active
MCHPMicrochip Technology
The ATA6561-GAQW-N is a high-speed CAN transceiver that provides an interface between a Controller Area Network (CAN) protocol controller and the physical two-wire CAN bus. It is designed for high-spe...
ATA6561-GBQW-N
Active
MCHPMicrochip Technology
The ATA6561-GBQW-N is a high-speed CAN transceiver that provides an interface between a Controller Area Network (CAN) protocol controller and the physical two-wire CAN bus. It supports data rates up t...
TJA1057GT/3J
Active
NXP USA Inc.The TJA1057GT/3J is a high-speed CAN transceiver designed for automotive and industrial applications, providing an interface between a CAN protocol controller and the physical two-wire CAN bus. This A...
TCAN1044AVDRQ1
Active
TITexas Instruments
The TCAN1044AVDRQ1 is an automotive-grade, high-speed CAN transceiver that facilitates communication in CAN and CAN FD networks. It operates at a data rate of 8 Mbps and is designed to interface betwe...
TJA1057CT/0Z
Active
NXP USA Inc.The TJA1057CT/0Z is a single-channel high-speed CAN transceiver from NXP that supports data rates up to 5 Mbit/s and includes a silent (listen-only) mode. It is a half-duplex 1/1 driver/receiver devic...
MCP2542FDT-E/SN
Active
MCHPMicrochip Technology
The MCP2542FDT-E/SN is a high-speed CAN FD transceiver designed for high-speed communication up to 8Mbps. It serves as the interface between a CAN protocol controller and the physical two-wire CAN bus...
TJA1050T/CM,118
Active
NXP USA Inc.The TJA1050T/CM,118 is a single-channel CAN bus transceiver from NXP in an 8-pin SOIC package. It implements a 1-driver/1-receiver, half-duplex interface and is intended for 5 V CAN networks. Key list...
TCAN1042HGVDRQ1
Active
TITexas Instruments
The TCAN1042HGVDRQ1 is an automotive-qualified CAN FD transceiver designed for high-speed networks up to 5 Mbps. This functional safety-capable device provides robust protection with +/-70V bus fault ...
TJA1057GTK/3Z
Active
NXP USA Inc.The TJA1057GTK/3Z is a high-speed CAN transceiver from NXP's Mantis family, designed to interface between a Controller Area Network (CAN) protocol controller and the physical two-wire CAN bus. This AE...
MCP2542WFD-E/SN
Active
MCHPMicrochip Technology
The MCP2542WFD-E/SN is a high-speed CAN FD transceiver designed for reliable communication between a CAN controller and the physical bus. It supports data rates up to 8Mbps and features an integrated ...
SN65HVD230DR
Active
TITexas Instruments
The SN65HVD230DR is a 3.3V CAN transceiver designed for use in applications employing the Controller Area Network (CAN) serial communication physical layer. It provides differential transmit and recei...
MCP2515-I/SO
NRND
MCHPMicrochip Technology
The MCP2515-I/SO is a stand-alone Controller Area Network (CAN) controller that implements the CAN specification, version 2.0B. It is designed to handle all CAN protocol functions including message fi...
1 variant
MCHPMicrochip Technology
The MCP2551-I/SN is a high-speed CAN transceiver that serves as the interface between a CAN protocol controller and the physical two-wire CAN bus. It is designed to support data rates up to 1 Mb/s and...
TJA1042TK/3,118
Active
NXP USA Inc.The TJA1042TK/3,118 is a high-speed CAN transceiver that provides the interface between a Controller Area Network (CAN) protocol controller and the physical two-wire CAN bus. This specific variant sup...
ADM3055EBRIZ
Active
ADIAnalog Devices Inc.
The ADM3055EBRIZ is a signal and power isolated CAN FD transceiver capable of supporting data rates up to 12Mbps. It integrates Analog Devices isoPower technology to provide an isolated DC-to-DC conve...
ADM3054BRWZ
Active
ADIAnalog Devices Inc.
The ADM3054BRWZ is a high-speed, isolated CAN physical layer transceiver with an integrated VCC2-side regulator. It provides 5kV rms digital isolation between the CAN controller and the physical bus l...
TCAN4550RGYT
Active
TITexas Instruments
The TCAN4550RGYT is a highly integrated CAN FD controller with an onboard transceiver that interfaces with a host processor via SPI. This single-chip solution allows microcontrollers without a native ...
ADM3052BRWZ
Active
ADIAnalog Devices Inc.
The ADM3052BRWZ is an isolated Controller Area Network (CAN) physical layer transceiver with an integrated V+ bus monitor. It provides a 1Mbps data rate and is designed to interface between the CAN co...
PEAK-SYSTEM
The PEAK-System IPEH-002021 is a high-performance USB-to-CAN interface that enables connection to CAN networks via a standard USB port. It features integrated galvanic isolation up to 500V and a compa...
MCP2518FD
MCP2518FDT-E/SL
MCHPMicrochip Technology
The MCP2518FD is a small-footprint, cost-effective CAN FD controller designed to interface with microcontrollers via a standard SPI port. It allows for the addition of a CAN FD channel to MCUs that ei...
TCAN1042GVDRQ1
NRND
TITexas Instruments
The TCAN1042GVDRQ1 is an automotive-qualified CAN transceiver designed to meet the ISO 11898-2:2016 physical layer standard. It supports high-speed CAN FD data rates up to 5Mbps and includes a 5V I/O ...
MAX14878AWE+T
NRND
ADIAnalog Devices Inc./Maxim Integrated
The MAX14878AWE+T is a high-speed, galvanically isolated CAN transceiver designed to provide robust communication in harsh environments. It supports data rates up to 1Mbps and features integrated isol...
TCAN330D
NRND
TITexas Instruments
The TCAN330D is a 3.3V CAN transceiver from Texas Instruments designed for high-speed CAN (Controller Area Network) communications up to 1Mbps. It operates from a single 3V to 3.6V supply, eliminating...
TCAN334GD
NRND
TITexas Instruments
The TCAN334GD is a 3.3-V CAN transceiver designed to support high-speed CAN FD (Flexible Data-rate) protocols up to 5 Mbps. It allows 3.3-V microcontrollers to interface directly with the CAN bus with...
TJA1051T/3/CM,118
NRND
NXP SemiconductorsThe TJA1051T/3/CM,118 is a high-speed CAN transceiver that provides an interface between a Controller Area Network (CAN) protocol controller and the physical two-wire CAN bus. This AEC-Q100 qualified ...
Browse CAN Bus from our distributor partners:
Search CAN Bus
