EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
27days 19hrs 55min 12sec
Learn More →
24LC256-E/P

MCHP24LC256-E/P

Microchip Technology
EEPROM Memory IC 256Kbit I2C 400 kHz 900 ns 8-PDIP
Active2,323 in stock

Overview

The 24LC256-E/P is a 256Kbit (32K x 8) I2C serial EEPROM designed for non-volatile data storage in demanding environments. It operates over a wide voltage range of 2.5V to 5.5V and features an extended temperature rating of -40C to 125C. This specific PDIP version is popular for prototyping and through-hole assembly due to its 2.54mm pin pitch.

Why Choose This Part

It offers high reliability with data retention exceeding 200 years and integrated Schmitt trigger inputs for noise suppression on the I2C bus. The 64-byte page write buffer and 5ms maximum write time improve throughput, while the hardware write-protect pin provides physical security against accidental data corruption.

Applications

Calibration Data Storage
Retaining sensor offset and gain parameters that must survive power cycles in industrial equipment.
Configuration and User Settings
Saving user preferences, network configurations, or device state information for microcontrollers with limited internal EEPROM.
Event Logging
Recording system logs or error codes with high endurance, supporting over one million erase/write cycles.

Key Specifications

Technology EEPROM
Access Time 900 ns
Memory Size 256Kbit
Memory Type Non-Volatile
Memory Format EEPROM
Mounting Type Through Hole
Package / Case 8-DIP (0.300", 7.62mm)
Clock Frequency 400 kHz
Memory Interface I2C
Voltage - Supply 2.5V ~ 5.5V
Memory Organization 32K x 8
Operating Temperature -40degC ~ 125degC (TA)
Supplier Device Package 8-PDIP
Write Cycle Time - Word, Page 5ms

Getting Started

To interface with a microcontroller, connect the SDA and SCL pins with 4.7k-ohm pull-up resistors to VDD. The three address pins (A0, A1, A2) allow for up to eight devices on the same bus, and the WP pin should be tied to ground for normal write operations. For software implementation, use standard I2C libraries such as the Wire library in Arduino or MCC for Microchip PIC MCUs.

Also Consider

24LC256-I/SN MCHPMicrochip Technology - The SOIC-8 surface-mount version of the same memory for production PCB designs.