MCHP24LC512-I/SN
Microchip Technology
EEPROM Memory IC 512Kbit I2C 400 kHz 900 ns 8-SOIC
NRND20,490 in stock
Overview
The 24LC512-I/SN is a 512 Kbit (64K x 8) Serial EEPROM capable of operating across a wide voltage range of 2.5V to 5.5V. It utilizes a standard 2-wire I2C interface and is designed for high-endurance non-volatile storage in industrial and automotive environments.
Why Choose This Part
This device features a low standby current of only 1 uA and supports up to 1 million erase/write cycles. It includes Schmitt Trigger inputs for noise suppression and hardware write-protect for improved data security.
Applications
Calibration Data Storage
Storing sensor offset and gain coefficients that must persist through power cycles in industrial instrumentation.
User Preference Logging
Saving configuration settings and user-defined profiles in consumer electronics and smart home devices.
Event Logging
Recording system faults or operational timestamps in automotive modules using its 128-byte page write capability.
Firmware Rollback Images
Holding backup bootloader code or recovery parameters for small microcontrollers.
Key Specifications
Technology
EEPROM
Access Time
900 ns
Memory Size
512Kbit
Memory Type
Non-Volatile
Memory Format
EEPROM
Mounting Type
Surface Mount
Package / Case
8-SOIC (0.154", 3.90mm Width)
Clock Frequency
400 kHz
Memory Interface
I2C
Voltage - Supply
2.5V ~ 5.5V
Memory Organization
64K x 8
Operating Temperature
-40degC ~ 85degC (TA)
Supplier Device Package
8-SOIC
Write Cycle Time - Word, Page
5ms
Getting Started
Connect the SDA and SCL pins to your microcontroller's I2C bus with 4.7k ohm pull-up resistors. Ensure the A0, A1, and A2 pins are tied to VSS or VCC to set the device address, and use the 128-byte page write buffer to optimize write cycle times.
Part of
24LCxx / AT24Cxx I2C EEPROM family
»
24LC512
24LC512 Family
| Part Number | Difference | Stock |
|---|---|---|
| 24LC512-I/P | P | 1,537 |
