EmbeddedRelated.com
The 2026 Embedded Online Conference
Calian 33-5386-07-10-05-PC0 GNSS Smart Antenna

Calian 33-5386-07-10-05-PC0 GNSS Smart Antenna

MPN: 33-5386-07-10-05-PC0
Tallysman
Antennas GNSS GPS MODULE : integrated L1 L2 antenna with u-blox ZED-F9R Receiver . RTK Rover. Point One Nav Polaris RTK , Swift Nav Skylark RTK , u-blox Point-Perfect PPP-RTK . Inertial Measurement Unit . RS-422
15 in stock

Overview

The 33-5386-07-10-05-PC0 is a high-precision, multi-band GNSS smart antenna featuring an integrated u-blox ZED-F9R engine and a dual-feed Accutenna element. It provides robust positioning through PPP-RTK support and an onboard Inertial Measurement Unit for Untethered Dead Reckoning (UDR), ensuring continuous availability during GNSS signal outages. Housed in an IP69K-rated industrial dome with an RS-422 interface and RJ45 termination, it is designed for demanding outdoor deployments.

Why Choose This Part

The combination of the u-blox F9 engine and Calian's Accutenna technology provides exceptional multi-path rejection and noise immunity. The wide input voltage range of 5V to 36V and the rugged IP69K enclosure simplify integration into diverse industrial power systems and harsh environmental conditions.

Applications

Autonomous Ground Vehicles
Utilizes the integrated IMU and UDR capabilities to maintain accurate positioning in urban canyons or under dense foliage where GNSS signals are obstructed.
Industrial Precision Timing
Leverages the expansive constellation array (GPS, GLONASS, Galileo, Beidou) for high-reliability timing and synchronization in distributed industrial networks.
Precision Agriculture
Uses multi-band ionospheric error resilience and PPP-RTK corrections to provide centimeter-level accuracy for automated steering and mapping.
Infrastructure Monitoring
IP69K ruggedization and RS-422 long-distance signaling make it suitable for permanent installation on telecommunications towers or bridges.

Key Specifications

Features Cable - 5m
Termination RJ45
Antenna Type Dome
Applications Beidou, Galileo, GLONASS, GNSS, GPS
Height (Max) 0.827" (21.00mm)
Mounting Type Panel Mount
Ingress Protection IP69K
RF Family/Standard Navigation

Getting Started

Connect the device to an RS-422 serial interface using the 5m cable to receive NMEA output data at the nominal 5VDC supply. Configuration and performance monitoring can be performed using the u-blox u-center software via the serial data stream to tune PPP-RTK settings or calibrate the internal IMU.

The 2026 Embedded Online Conference