EmbeddedRelated.com
The 2026 Embedded Online Conference
    Parts    410-249
JTAG-HS3 Programming Cable

DGLJTAG-HS3 Programming Cable

MPN: 410-249
Digilent, Inc.
FPGA - Programmer (In-Circuit/In-System)
Active881 in stock
Datasheet Digi-Key Compare Prices

Overview

The Digilent JTAG-HS3 is a compact, all-in-one programming solution for Xilinx FPGAs and CPLDs. It connects via a high-speed USB 2.0 port and provides a dedicated JTAG/SPI interface capable of data rates up to 30Mbit/sec.

Why Choose This Part

This programmer features a separate Vref pin that allows JTAG and SPI signal voltages to operate between 1.8V and 5V. It is compliant with IEEE 1149.7-2009 for advanced 2-wire JTAG features and integrates seamlessly with the full Xilinx toolchain without requiring external drivers.

Applications

Xilinx FPGA Programming
Directly compatible with Vivado and ISE for programming and debugging 7-series and newer Xilinx FPGAs.
Zynq SoC Debugging
Supports JTAG debugging for Xilinx Zynq-7000 and Zynq UltraScale+ MPSoC devices.
Custom JTAG/SPI Development
Utilize the Adept SDK to create custom PC-based applications for testing or controlling JTAG/SPI hardware.
SPI Flash Programming
Direct programming of SPI flash memories at frequencies up to 30Mbit/sec in SPI modes 0 and 2.

Key Specifications

Type Programmer (In-Circuit/In-System)
Contents Board(s)
Utilized IC / Part FPGA

Getting Started

Connect the JTAG-HS3 to your PC via a Micro-USB cable and attach the 2x7 header to your target board. It is automatically recognized by Xilinx Vivado, ISE, and Digilent Adept software for immediate deployment. Ensure the target board provides a stable Vref to the programmer to match signal levels correctly.

Also Consider

JTAG-HS2 DGLDigilent, Inc. - A similar high-speed JTAG solution for cases where the HS3 open-drain buffer for pin 14 is not required.
The 2026 Embedded Online Conference