EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
30days 10hrs 14min 34sec
Learn More →
4D ClearCore Adaptor

4D ClearCore Adaptor

MPN: 4D CLEARCORE ADAPTOR
4D Systems Pty Ltd
GEN4-ULCD-43D, PixxiLCD, uLCD, uOLED - Adapter
Active40 in stock

Overview

The 4D ClearCore Adaptor is a specialized interface board designed to connect 4D Systems intelligent display modules to the Teknic ClearCore Industrial I/O and Motion Controller. It facilitates seamless communication between the controller and various display series including gen4-uLCD, uLCD, uOLED, and pixxiLCD. The adaptor handles the electrical and physical interfacing required for both operational control and USB-based programming.

Why Choose This Part

This adaptor simplifies industrial wiring by providing a direct bridge between the Teknic ClearCore and 4D Systems hardware, supporting a wide input voltage range of 4.5V to 30V. It features a rugged design with a 30-pin interface and includes an integrated USB port for easy firmware updates and debugging without disconnecting the main controller.

Applications

Industrial HMI for Motion Control
Used to add a high-resolution graphical user interface to Teknic ClearCore based industrial automation systems.
Display Programming
Provides a USB interface for configuring and uploading graphics code to 4D Systems displays using Workshop4 IDE.
Legacy uLCD/uOLED Interfacing
Enables modern motion controllers to interact with established uLCD and uOLED display hardware via UART.

Key Specifications

Accessory Type Adapter
Utilized IC / Part GEN4-ULCD-43D, PixxiLCD, uLCD, uOLED

Getting Started

Connect the adaptor to the Teknic ClearCore controller and plug in your 4D Systems display module via the appropriate FFC or pin header. Use the 4D Systems Workshop4 IDE to develop your graphical interface and deploy it through the adaptor's USB port. Ensure your power supply is within the 4.5V to 30V range for stable operation across the UART and USB interfaces.

Also Consider

gen4-PA Programming Adaptor 4D Systems - Designed specifically for the gen4 series displays when standard USB-to-Serial programming is the only requirement.