EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
28days 13hrs 36min 49sec
Learn More →
74ALVC244PW

74ALVC244PW

MPN: 74ALVC244PW,118
Nexperia USA Inc.
Buffer, Non-Inverting 2 Element 4 Bit per Element 3-State Output 20-TSSOP
Active863 in stock

Overview

The 74ALVC244PW is a high-performance, non-inverting octal buffer and line driver designed for low-voltage applications ranging from 1.65V to 3.6V. It features two 4-bit elements with independent 3-state output enables, making it ideal for bus-oriented communication and signal isolation. The device includes IOFF circuitry for partial power-down protection, preventing backflow current when the device is powered off.

Why Choose This Part

This buffer offers low power consumption and high-speed operation with overvoltage-tolerant inputs that can directly interface with TTL logic. It features robust ESD protection exceeding 2000V HBM and latch-up performance better than 250mA, ensuring reliability in industrial environments.

Applications

Memory Address Drivers
Used to drive address lines in high-speed memory arrays where low propagation delay is required.
Bus Buffer and Isolation
Provides high-current driving capability (24mA) and high-impedance state isolation for shared data buses.
Voltage Level Shifting
Facilitates communication between logic levels in mixed-voltage systems, specifically for 1.8V, 2.5V, and 3.3V nodes.
Clock Distribution
Distributes clock signals across multiple PCB sections with minimal skew and high signal integrity.

Key Specifications

Logic Type Buffer, Non-Inverting
Output Type 3-State
Mounting Type Surface Mount
Package / Case 20-TSSOP (0.173", 4.40mm Width)
Voltage - Supply 1.65V ~ 3.6V
Number of Elements 2
Operating Temperature -40degC ~ 85degC (TA)
Supplier Device Package 20-TSSOP
Current - Output High, Low 24mA, 24mA
Number of Bits per Element 4

Getting Started

To implement this part, decouple the VCC pin with a 0.1uF ceramic capacitor placed close to the 20-TSSOP package. Ensure the Output Enable (OE) pins are tied high through a pull-up resistor if the high-impedance state is required during power-up. For prototyping, use a TSSOP-20 to DIP adapter board to interface with standard breadboards.