EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
28days 02hrs 18min 30sec
Learn More →
74AVCH2T45DC,125

74AVCH2T45DC,125

Nexperia USA Inc.
Voltage Level Translator Bidirectional 1 Circuit 2 Channel 500Mbps 8-VSSOP
Active1,533 in stock

Overview

The 74AVCH2T45DC,125 is a dual-bit, dual-supply voltage level translator designed for bidirectional asynchronous communication between voltage nodes ranging from 0.8V to 3.6V. It features bus-hold circuitry on data inputs to maintain valid logic levels without external resistors and supports high-speed data rates up to 500Mbps.

Why Choose This Part

This translator provides excellent signal integrity with less than 10 percent overshoot and undershoot while maintaining a high data rate of 500Mbps. The integrated bus-hold feature eliminates the need for external pull-up or pull-down resistors on CMOS inputs, reducing PCB component count and power consumption.

Applications

Low-Voltage Logic Interfacing
Bridging 0.8V or 1.2V core logic with 1.8V, 2.5V, or 3.3V I/O peripherals.
High-Speed Data Buses
Interfacing high-speed digital signals up to 500Mbps between processors and memory or FPGAs.
Mobile and Battery-Powered Devices
Utilizing suspend mode and low 11.5uA quiescent current to extend battery life in portable electronics.
Partial Power-Down Systems
Using Ioff circuitry to safely isolate the bus when one supply rail is powered down, preventing backflow current.

Key Specifications

Data Rate 500Mbps
Output Type Tri-State, Non-Inverted
Channel Type Bidirectional
Mounting Type Surface Mount
Package / Case 8-VFSOP (0.091", 2.30mm Width)
Voltage - VCCA 0.8 V ~ 3.6 V
Voltage - VCCB 0.8 V ~ 3.6 V
Translator Type Voltage Level
Number of Circuits 1
Channels per Circuit 2
Operating Temperature -40degC ~ 125degC (TA)
Supplier Device Package 8-VSSOP

Getting Started

Ensure VCCA and VCCB are decoupled with 0.1uF capacitors placed close to the 8-VSSOP package pins. Set the DIR pin to control signal direction, and note that both supply voltages must be within the 0.8V to 3.6V range for proper operation.

Also Consider

TXB0102DCUR TITexas Instruments - An alternative 2-bit translator that features auto-direction sensing, eliminating the need for a direction control pin.