EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Nov 1 · 5 live sessions, Dec 7-11
Discount ends in
15days 19hrs 14min 08sec
Learn More →
    Parts   Analog ICs  Analog Switches & Multiplexers    74HC4051D,653
74HC4051D,653

74HC4051D,653

Nexperia USA Inc.
1 Circuit IC Switch 8:1 120Ohm 16-SO
Active14,411 in stock
Datasheet Digi-Key Mouser Compare Prices

Overview

The 74HC4051D is an 8-channel analog multiplexer/demultiplexer featuring three digital select inputs and an enable input. It is designed to handle both analog and digital signals, allowing for the switching of voltages up to +/-5V when using a dual supply or up to 10V with a single supply. This CMOS device provides low power consumption and high noise immunity for signal routing applications.

Why Choose This Part

It offers high-speed operation with switch times as low as 42ns and a high -3db bandwidth of 180MHz, making it suitable for video or high-frequency switching. The device supports a wide supply range from 2V to 10V and features built-in 'break-before-make' switching to prevent signal overlap.

Applications

Analog Signal Routing
Switching multiple sensor signals into a single ADC input to reduce microcontroller pin count.
Logic Level Translation
Interfacing 5V digital logic with analog signals ranging from -5V to +5V.
Digital Data Multiplexing
Selecting one of eight digital data lines to be routed to a single processor input.
Signal Gating
Using the Enable pin to quickly disconnect all eight channels for signal isolation.

Key Specifications

Mounting Type Surface Mount
-3db Bandwidth 180MHz
Package / Case 16-SOIC (0.154", 3.90mm Width)
Number of Circuits 1
Operating Temperature -40degC ~ 125degC (TA)
Supplier Device Package 16-SO
On-State Resistance (Max) 120Ohm
Switch Time (Ton, Toff) (Max) 51ns, 42ns
Voltage - Supply, Dual (V+/-) +/-1.5V ~ 5V
Voltage - Supply, Single (V+) 2V ~ 10V
Current - Leakage (IS(off)) (Max) 400nA
Multiplexer/Demultiplexer Circuit 8:1
Channel Capacitance (CS(off), CD(off)) 3.5pF
Channel-to-Channel Matching (ΔRon) 6Ohm

Getting Started

Connect the S0-S2 select pins to your microcontroller's GPIO to choose the active channel. Ensure the E (Enable) pin is pulled low for operation and remember that the VEE pin must be connected to the most negative voltage in the system (GND for single-supply or -5V for dual-supply). Use decoupling capacitors on VCC to minimize noise during high-speed switching.

Also Consider

CD74HC4051M96 TITexas Instruments - A direct equivalent 8:1 multiplexer in an SOIC-16 package with similar electrical characteristics.
74HC4051PW Nexperia - Select this variant if a smaller TSSOP16 package is required for high-density PCB layouts.
MAX4617CUE+ Analog Devices - An alternative high-speed CMOS multiplexer with lower On-Resistance for applications sensitive to signal attenuation.

Categories

Analog ICs > Analog Switches & Multiplexers