EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
27days 19hrs 45min 23sec
Learn More →
74LVC125ABQ,115

74LVC125ABQ,115

Nexperia USA Inc.
Buffer, Non-Inverting 4 Element 1 Bit per Element 3-State Output 14-DHVQFN (2.5x3)
Active20,160 in stock

Overview

The 74LVC125ABQ is a quad non-inverting buffer featuring 3-state outputs controlled by four independent output enable inputs. Designed for operation between 1.2V and 3.6V, it serves as a high-performance CMOS logic gate for bus-oriented applications. The device includes 5V tolerant inputs, making it an excellent choice for mixed-voltage system environments.

Why Choose This Part

The part features IOFF circuitry for partial power-down mode, preventing damaging backflow current when the device is powered down. Its DHVQFN14 package provides a significant space saving over traditional SO14 or TSSOP footprints while offering an exposed pad for improved thermal dissipation. High drive capability of 24mA and Schmitt-trigger action on inputs ensure robust performance in noisy digital environments.

Applications

Voltage Level Translation
Utilizing 5V tolerant inputs to interface 5V logic signals with 3.3V or lower voltage microcontroller GPIOs.
Bus Isolation
Using the 3-state outputs to disconnect sections of a shared data bus to prevent signal contention or reduce power.
LED Driving
Providing up to 24mA of drive current per channel to switch status LEDs or small loads from low-power control signals.
Clock Distribution
Buffering high-frequency clock signals to multiple loads while maintaining signal integrity and providing isolation.

Key Specifications

Logic Type Buffer, Non-Inverting
Output Type 3-State
Mounting Type Surface Mount
Package / Case 14-VFQFN Exposed Pad
Voltage - Supply 1.2V ~ 3.6V
Number of Elements 4
Operating Temperature -40degC ~ 125degC (TA)
Supplier Device Package 14-DHVQFN (2.5x3)
Current - Output High, Low 24mA, 24mA
Number of Bits per Element 1

Getting Started

To integrate this component, ensure the exposed thermal pad is soldered to a grounded copper plane for mechanical stability and heat sinking. Decouple the VCC pin with a 0.1uF ceramic capacitor placed as close to the 14-DHVQFN package as possible. Use the OE pins to manage high-impedance states, noting that a HIGH level on OE disables the respective output.