J-Link Measurement and Patch Adapter
Overview
The Segger 8.06.13 is a specialized adapter board designed to sit between a J-Link debug probe and the target hardware. It breaks out all debug signals to accessible test points and includes jumpers for manual control over power and reference voltage lines. This tool is essential for engineers needing to monitor signal integrity or perform manual patching during the hardware bring-up phase.
Why Choose This Part
The board provides immediate physical access to every line in the standard 20-pin 0.1 inch J-Link interface without soldering. It simplifies the troubleshooting of communication errors by allowing engineers to break or reroute connections on the fly using standard jumpers and wires.
Applications
Key Specifications
Getting Started
Connect the 20-pin socket to your J-Link debug probe and the 20-pin header to your target board using a standard ribbon cable. Ensure the jumpers for VTref and target supply are correctly positioned based on whether you are powering the target from the J-Link or an external source. Use the provided jumper wires to bridge test points if custom pin mapping is required for non-standard target headers.
