EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
22days 20hrs 00min 55sec
Learn More →

A/CO2-R2O-AN CO2 Sensor

MPN: A/CO2-R2O-AN
Automation Components, Inc.
Carbon Dioxide (CO2) Sensor 0V ~ 5V, 0V ~ 10V, 4mA ~ 20mA
Active25 in stock

Overview

The A/CO2-R2O-AN is a room-mounted carbon dioxide sensor designed for indoor air quality monitoring and demand control ventilation. It utilizes Non-Dispersive Infrared (NDIR) technology to provide accurate CO2 measurements up to 2,000 ppm, with support for factory-configured ranges up to 10,000 ppm. The sensor features a flexible multi-output design that supports 0-5 VDC, 0-10 VDC, and 4-20 mA signals to interface with diverse building automation systems.

Why Choose This Part

The sensor includes Automatic Baseline Correction (ABC) software to minimize long-term drift and ensure accuracy without frequent manual calibration. Its wide supply voltage range of 16.5 to 40 VDC (or 24 VAC) and triple-output format (voltage and current) make it highly compatible with existing PLC and BAS infrastructure.

Applications

Demand Control Ventilation (DCV)
Optimizing HVAC fresh air intake in schools and office buildings based on occupancy levels to reduce energy consumption.
Institutional Air Quality Monitoring
Continuous CO2 tracking in high-occupancy areas such as auditoriums, gymnasiums, and theatres to maintain health standards.
Retail and Commercial HVAC
Integrated monitoring for shopping malls and commercial complexes to ensure compliance with ventilation codes.

Key Specifications

Type Carbon Dioxide (CO2)
Output 0V ~ 5V, 0V ~ 10V, 4mA ~ 20mA
Voltage - Supply 24VAC, 16.5VDC ~ 40VDC
Operating Temperature 0degC ~ 50degC

Getting Started

Installation requires mounting the ABS plastic enclosure to a standard junction box and wiring the power and signal lines to a controller. Configure the jumper settings to select between 0-5V, 0-10V, or 4-20mA output modes based on your PLC or ADC input requirements. Ensure the sensor is placed in a location with representative airflow, away from direct breath sources or ventilation diffusers.

A/CO2-R2O Family

Part NumberDifferenceStock
A/CO2-R2O-CP CP 25
Also available as: A/CO2-R2O

Also Consider

SCD41 SENSensirion AG - A compact, surface-mount photoacoustic CO2 sensor for designs requiring direct PCB integration rather than a wall-mount housing.