EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
22days 14hrs 09min 19sec
Learn More →
ACS725KMATR-30AB-T

ACS725KMATR-30AB-T

Allegro MicroSystems
Current Sensor 30A 1 Channel Hall Effect, Differential Bidirectional 16-SOIC (0.295", 7.50mm Width)
Active4,413 in stock

Overview

The ACS725KMATR-30AB-T is a high-accuracy, 30A bidirectional Hall-effect current sensor designed for low-voltage sensing applications between 3.0V and 3.6V. It utilizes differential sensing technology to achieve excellent common-mode field rejection and digital temperature compensation for near closed-loop accuracy in an open-loop SOIC16 package.

Why Choose This Part

This sensor offers a 120kHz bandwidth and a fast 4us response time, making it suitable for high-speed switching applications. The integrated differential sensing provides immunity to stray magnetic fields, while the 1% typical accuracy and digital temperature compensation ensure stable performance across its full operating range of -40C to 125C.

Applications

DC-to-DC Converters
Monitoring high-side or low-side current for feedback loops and overcurrent protection in power conversion stages.
Industrial Motor Control
Precision phase current sensing in small motors and actuators where space is limited and high isolation is required.
Battery Management Systems
Tracking charge and discharge cycles in 3.3V systems with 44mV/A sensitivity and bidirectional capability.
Load Detection and Management
Real-time power consumption monitoring for industrial automation and smart energy applications.

Key Specifications

Output Ratiometric, Voltage
Accuracy +/-1%
Frequency DC ~ 120kHz
Linearity +/-1%
Sensitivity 44mV/A
Sensor Type Hall Effect, Differential
Polarization Bidirectional
For Measuring AC/DC
Mounting Type Surface Mount
Response Time 4us
Package / Case 16-SOIC (0.295", 7.50mm Width)
Voltage - Supply 3V ~ 3.6V
Current - Sensing 30A
Number of Channels 1
Operating Temperature -40degC ~ 125degC
Current - Supply (Max) 14mA
Supplier Device Package 16-SOIC

Getting Started

To evaluate this sensor, engineers can use a custom PCB with the low-resistance primary conductor footprint or look for Allegro ASEK evaluation kits. Connect the filter pin to a capacitor to adjust the bandwidth for noise reduction, and ensure the ratiometric output is interfaced with a 3.3V ADC for maximum dynamic range.

Also Consider

ACS712ELCTR-30A-T Allegro MicroSystems - An industry-standard 5V alternative for 30A sensing when a 3.3V supply is not available.
ACS724KMATR-30AB-T Allegro MicroSystems - Very similar performance characteristics but designed for 5V supply rails instead of 3.3V.