EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
25days 06hrs 44min 32sec
Learn More →
ACS725LLCTR-10AB-T

ACS725LLCTR-10AB-T

Allegro MicroSystems
Current Sensor 10A 1 Channel Hall Effect, Differential Bidirectional 8-SOIC (0.154", 3.90mm Width)
Active2,455 in stock

Overview

The ACS725LLCTR-10AB-T is a high-accuracy, 10A bidirectional Hall-effect current sensor designed for 3.3V systems. It utilizes a differential sensing technique to reject external common-mode magnetic fields, ensuring reliable operation in noisy electrical environments. This AEC-Q100 qualified IC provides an analog output proportional to the measured AC or DC current with an integrated shield to minimize capacitive coupling.

Why Choose This Part

This sensor offers industry-leading noise performance and a high bandwidth of 120kHz, making it suitable for fast-switching power applications. Its ratiometric output and internal temperature compensation maintain a low error rate of +/-0.8% typical accuracy. The SOIC8 package provides a compact footprint with integrated galvanic isolation, eliminating the need for bulky shunt resistors and opto-isolators.

Applications

Solar Inverters
Monitoring DC input and AC output currents for maximum power point tracking and safety.
Automotive DC/DC Converters
High-side or low-side current sensing in vehicle power management systems requiring AEC-Q100 reliability.
Motor Phase Current Sensing
Utilizing the 120kHz bandwidth and 4us response time for precise closed-loop motor control.
Battery Management Systems (BMS)
Tracking bidirectional charge and discharge cycles in small-scale energy storage solutions.

Key Specifications

Output Ratiometric, Voltage
Accuracy +/-0.8%
Frequency DC ~ 120kHz
Linearity +/-1.5%
Sensitivity 132mV/A
Sensor Type Hall Effect, Differential
Polarization Bidirectional
For Measuring AC/DC
Mounting Type Surface Mount
Response Time 4us
Package / Case 8-SOIC (0.154", 3.90mm Width)
Voltage - Supply 3V ~ 3.6V
Current - Sensing 10A
Number of Channels 1
Operating Temperature -40degC ~ 150degC
Current - Supply (Max) 14mA

Getting Started

Connect the current path to pins 1/2 and 3/4, and provide a stable 3.3V supply to VCC. Use the FILTER pin with an external capacitor to adjust the bandwidth and noise floor according to your application requirements. For evaluation, ensure the PCB trace width is sufficient to handle the 10A continuous current without excessive thermal rise.

Also Consider

ACS724LLCTR-10AB-T Allegro MicroSystems - Similar 10A bidirectional sensor designed for 5V supply systems instead of 3.3V.
ACS712ELCTR-05B-T Allegro MicroSystems - A legacy 5V current sensor option for lower current (5A) requirements where differential sensing is not critical.