EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
22days 13hrs 35min 12sec
Learn More →
ADA4062-2ARMZ-R7

ADIADA4062-2ARMZ-R7

Analog Devices Inc.
J-FET Amplifier 2 Circuit 8-MSOP
Active5,738 in stock

Overview

The ADA4062-2ARMZ-R7 is a dual-channel JFET-input operational amplifier designed for low power consumption and high input impedance. It features a typical quiescent current of only 165 microamps per amplifier while maintaining a 1.4 MHz gain bandwidth product and a 3.3V/us slew rate. This combination makes it suitable for battery-powered applications requiring high speed and low input bias currents.

Why Choose This Part

This amplifier offers an excellent balance between low power consumption and dynamic performance with a 3.3V/us slew rate. The JFET input stage provides exceptionally low input bias current of 2 pA and a 750 uV offset voltage, making it superior to standard bipolar op-amps for high-impedance source interfacing.

Applications

Photodiode Transimpedance Amplifiers
Utilizes the ultra-low 2 pA input bias current to convert small sensor currents into usable voltages with minimal error.
Battery-Powered Instrumentation
Provides dual-channel amplification in a compact MSOP package while drawing only 165 microamps per circuit to extend battery life.
Precision Filters
High input impedance and 1.4 MHz bandwidth allow for the design of active filters with high-value resistors.
Level Shifting and Buffering
Ideal for high-impedance signal conditioning before ADC stages in portable data loggers.

Key Specifications

Slew Rate 3.3V/us
Mounting Type Surface Mount
Amplifier Type J-FET
Package / Case 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Current - Supply 165uA (x2 Channels)
Number of Circuits 2
Current - Input Bias 2 pA
Operating Temperature -40degC ~ 125degC
Gain Bandwidth Product 1.4 MHz
Voltage - Input Offset 750 uV
Supplier Device Package 8-MSOP
Current - Output / Channel 20 mA
Voltage - Supply Span (Max) 36 V
Voltage - Supply Span (Min) 8 V

Getting Started

For rapid prototyping, the ADA4062-2 can be evaluated using a standard 8-MSOP to DIP adapter on a breadboard. Ensure bypass capacitors of 0.1 uF are placed as close as possible to the V+ and V- supply pins, and follow standard PCB layout practices for high-impedance nodes to prevent leakage currents from degrading performance.

Also Consider

AD8606 ADIAnalog Devices Inc. - A CMOS alternative offering rail-to-rail input and output for low-voltage, single-supply applications.