EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
22days 13hrs 46min 35sec
Learn More →
AP2114H-1.8TRG1

DIOAP2114H-1.8TRG1

Diodes Incorporated
Linear Voltage Regulator IC Positive Fixed 1 Output 1A SOT-223-3
Active20,492 in stock

Overview

The AP2114H-1.8TRG1 is a positive fixed linear voltage regulator from Diodes Incorporated, providing a 1.8V output at up to 1A of current. It is designed for low-dropout operation with an input voltage range of 2.5V to 6V, making it suitable for low-voltage power rails in portable and consumer electronics. The device includes integrated protection features such as over-current fold-back and thermal shutdown to ensure robust performance.

Why Choose This Part

This regulator is compatible with a wide variety of output capacitors, including 4.7uF ceramic, tantalum, or aluminum electrolytic types, providing significant design flexibility. It features a low quiescent current of 60uA and a high PSRR of 68dB at 1kHz, which helps maintain a clean output in noise-sensitive environments.

Applications

Microcontroller Power Rails
Providing a stable 1.8V supply for low-power MCU cores and digital logic circuits requiring up to 1A.
Battery-Powered Equipment
Utilizing the 1uA shutdown current to extend battery life in portable devices when the regulator is disabled.
FPGA I/O Supplies
Supplying clean 1.8V power for FPGA or CPLD I/O banks that demand moderate current and low noise.
Communication Modules
Powering wireless modules or network interfaces that require regulated 1.8V from a 3.3V or 5V source.

Key Specifications

PSRR 68dB (100Hz ~ 1kHz)
Output Type Fixed
Mounting Type Surface Mount
Package / Case TO-261-4, TO-261AA
Current - Output 1A
Protection Features Over Current, Over Temperature
Number of Regulators 1
Output Configuration Positive
Operating Temperature -40degC ~ 85degC
Voltage - Input (Max) 6V
Voltage Dropout (Max) 0.7V @ 1A
Supplier Device Package SOT-223-3
Current - Quiescent (Iq) 75 uA
Voltage - Output (Min/Fixed) 1.8V

Getting Started

To implement this device, place a 4.7uF ceramic capacitor close to both the input and output pins for stability. Ensure the SOT-223 package is soldered to a PCB area with sufficient copper for heat dissipation, as the regulator handles up to 1A of load current. For low-power modes, use the enable pin to trigger the 1uA shutdown state.

Also Consider

LD1117S18TR STMicroelectronics - A standard 1117-series alternative in the same SOT-223 package with a 1.8V fixed output.
AZ1117CH-1.8TRG1 DIODiodes Incorporated - A similar 1A low-dropout regulator often used for cost-sensitive applications with higher input voltage ratings.
MCP1727-1802E/SN MCHPMicrochip - Offers a 1.5A output current and a Power Good indicator for systems requiring more power and monitoring.