EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
19days 18hrs 07min 54sec
Learn More →
AP22811BW5-7

DIOAP22811BW5-7

Diodes Incorporated
Power Switch/Driver 1:1 P-Channel 2A SOT-25
142,043 in stock

Overview

The AP22811BW5-7 is a single-channel, P-channel power switch designed for USB and other hot-swap applications. It operates from a 2.7V to 5.5V input range and supports a continuous output current of up to 2A with a low 50mOhm on-resistance. This specific variant features an active-low enable and integrated fault reporting with a 6ms blanking time to prevent false triggers during over-current events.

Why Choose This Part

The integrated 6ms fault blanking time prevents nuisance tripping from inrush currents while the reverse current protection ensures the system is safe even when the output voltage exceeds the input. It offers a compact SOT-25 footprint with a very low 0.1uA shutdown current, significantly extending battery life in portable designs.

Applications

USB Port Protection
Ideal for protecting USB 2.0 and 3.0 ports in notebooks, desktops, and hubs against short circuits and over-current conditions.
Hot-Swap Peripherals
Provides controlled power-up via a 0.6ms typical rise time soft-start for external storage drives and docking stations.
Set-Top Boxes and TVs
Used as a load switch to manage power rails for internal modules and external USB accessory ports.

Key Specifications

Features Load Discharge, Status Flag
Interface On/Off
Input Type Inverting
Output Type P-Channel
Switch Type USB Switch
Rds On (Typ) 50mOhm
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Voltage - Load 2.7V ~ 5.5V
Fault Protection Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Number of Outputs 1
Output Configuration High Side
Ratio - Input:Output 1:1
Operating Temperature -40degC ~ 85degC (TA)
Current - Output (Max) 2A
Supplier Device Package SOT-25
Voltage - Supply (Vcc/Vdd) Not Required

Getting Started

When designing the PCB, place a 0.1uF to 1uF ceramic bypass capacitor close to the IN pin and a 1uF to 10uF capacitor on the OUT pin for stability. Connect the FLG pin to the system microcontroller via a 10kOhm pull-up resistor to monitor for over-current or over-temperature conditions. Ensure the active-low EN pin is driven by a logic signal that stays within the 2.7V to 5.5V supply range.

AP2281 Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Input Type Fault Protection Current - Output (Max) Stock
AP22811BW5-7 (this part) Inverting Current Limiting (.. 2A 142,043
AP22811AW5-7 Non-Inverting Current Limiting (.. 2A 160,223
AP22814AW5-7 Non-Inverting Current Limiting (.. 3A 17,450

Also Consider

TPS2065C TITexas Instruments - A widely used 2A power switch with a similar SOT-23-5 package and active-low enable functionality.
AP22811AW5-7 DIODiodes Incorporated - The active-high version of the same power switch for designs requiring positive logic control.