EmbeddedRelated.com
    Parts    APD5P0.2-0.1-C2.5-P
APD5P0.2-0.1-C2.5-P

APD5P0.2-0.1-C2.5-P

SDS HIGH VOLTAGE
High Voltage - Non-Isolated Module DC DC Converter 1 Output 0 ~ 200V 500µA 4.5V - 5.5V Input
Active12 in stock
Datasheet Digi-Key Compare Prices

Overview

The APD5P0.2-0.1-C2.5-P is a micro-sized, non-isolated high voltage DC-DC converter module designed to provide a regulated 0 to 200V positive output from a 5V nominal input. Measuring only 25.5mm x 20.5mm, this PCB-mount module offers precision control with an integrated 2.5V reference voltage and monitoring capabilities. It is engineered for low-noise applications requiring tight line and load regulation in a compact horizontal footprint.

Why Choose This Part

This module features active-low enable control and short-circuit protection, ensuring system reliability in experimental environments. Its low temperature coefficient and 1 percent accuracy make it suitable for precision measurement loops where thermal stability is required. The integrated voltage monitor pin allows for real-time feedback without additional high-voltage divider circuitry.

Applications

Photomultiplier Tube (PMT) Biasing
Providing stable, low-ripple high voltage for sensitive optical detectors.
Electrostatic Actuators
Driving MEMS devices or electrostatic lenses that require precise voltage control up to 200V.
Avalanche Photodiode (APD) Bias
Supplying the necessary reverse bias voltage for high-speed fiber optic and LIDAR receivers.
Scientific Instrumentation
Used in portable analyzers and spectroscopy equipment where low power consumption and small size are critical.

Key Specifications

Type High Voltage - Non-Isolated Module
Applications Industrial, ITE (Commercial)
Mounting Type Through Hole, Horizontal
Power (Watts) 0.1 W
Approval Agency CE
Control Features Enable, Active Low
Size / Dimension 1.00" L x 0.81" W x 0.43" H (25.5mm x 20.5mm x 11.0mm)
Number of Outputs 1
Voltage - Output 1 0 ~ 200V
Operating Temperature -40degC ~ 85degC
Voltage - Input (Max) 5.5V
Voltage - Input (Min) 4.5V
Current - Output (Max) 500uA

Getting Started

To integrate this module, provide a stable 5V supply and use the control pin for active-low inhibition logic. The horizontal through-hole pins allow for direct PCB mounting; ensure adequate clearance distances for the 200V output trace to prevent arcing. Designers should utilize the C2.5 reference pin to calibrate external control circuitry for precise output scaling.