EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
27days 04hrs 38min 36sec
Learn More →
AQY210EH

AQY210EH

Panasonic Electric Works
Solid State Photo-Coupled Relay (Photorelay) SPST-NO (1 Form A) 4-DIP (0.300", 7.62mm)
Active6,060 in stock

Overview

The AQY210EH is a PhotoMOS solid-state relay designed for high-voltage switching applications up to 350V. It features 5,000V I/O isolation in a compact 4-pin DIP package, providing a reliable alternative to mechanical relays with no moving parts. This SPST-NO (1 Form A) device is highly sensitive, operating with a low input current of 1.2mA while maintaining a low off-state leakage current of 1 microamp.

Why Choose This Part

The component offers a high 5,000V isolation voltage, ensuring safety between control and load circuits. Its solid-state design eliminates contact bounce and wear, offering significantly longer life cycles than electromechanical alternatives. With a maximum on-resistance of 25 Ohms and the ability to handle both AC and DC loads, it provides versatile performance for low-current applications up to 130mA.

Applications

Telecommunications Equipment
Ideal for hook switching and signal routing in modems and telephone systems due to high isolation and low leakage.
Industrial Control Systems
Used in plant equipment for switching low-level analog signals and managing I/O interfaces safely.
Security and Monitoring
Provides silent, reliable switching for alarm sensors and security control panels.
Data Acquisition Systems
Enables precise sensing and measurement by controlling signals with high sensitivity and minimal noise interference.

Key Specifications

Circuit SPST-NO (1 Form A)
Relay Type Photo-Coupled Relay (Photorelay)
Output Type AC, DC
Load Current 130 mA
Mounting Type Surface Mount
Package / Case 4-SMD (0.300", 7.62mm)
Voltage - Load 0 V ~ 350 V
Approval Agency BSI, cURus
Voltage - Input 1.14VDC
Termination Style Gull Wing
Operating Temperature -40degC ~ 85degC
Supplier Device Package 4-SMD
On-State Resistance (Max) 25 Ohms

Getting Started

To integrate the AQY210EH, design a current-limiting resistor for the input LED side to target the 1.2mA typical operating current based on your logic voltage. Ensure the load remains within the 350V and 130mA limits, and use the 4-DIP footprint for through-hole mounting or select the EHA variant for surface mount designs. Thermal management is generally not required for these power levels, but PCB creepage distances should be maintained to preserve the 5kV isolation rating.

AQY210 Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Load Current Package Stock
AQY210EH (this part) 130 mA SMD-4 6,060
AQY210SX 120 mA SOP-4 20,458
AQY210EHA 130 mA SMD-4 5,366

Also Consider

LCA110 IXYS Integrated Circuits Division - An alternative 350V, 120mA SPST-NO solid state relay with similar 3750Vrms isolation in a 6-pin package.