EmbeddedRelated.com
    Parts    ARM-USB-TINY-H
ARM-USB-TINY-H

ARM-USB-TINY-H

Olimex LTD
ARM® - Debugger
Active86 in stock
Datasheet Digi-Key Mouser Compare Prices

Overview

The ARM-USB-TINY-H is a high-speed USB 2.0 JTAG debugger designed for programming and debugging ARM-based microcontrollers. It features a standard 20-pin JTAG connector and supports target voltages ranging from 2.0V to 5.0V. This probe is widely recognized for its compatibility with OpenOCD and provides a cost-effective alternative to proprietary debuggers.

Why Choose This Part

The ARM-USB-TINY-H offers high-speed USB 2.0 performance at a significantly lower price point than many commercial JTAG tools. Its native support in the OpenOCD community ensures longevity and broad device compatibility without requiring expensive proprietary licenses.

Applications

Firmware Development
Providing real-time debugging and flash programming for ARM7, ARM9, and Cortex-M targets via OpenOCD.
Production Programming
Using the high-speed USB 2.0 interface for rapid mass-flashing of ARM microcontrollers in small-scale manufacturing.
Linux Kernel Debugging
Interfacing with low-level hardware registers and kernel execution on ARM-based SoCs.

Key Specifications

Type Debugger
Contents Board(s)
Utilized IC / Part ARM

Getting Started

Connect the 20-pin JTAG cable to your target hardware and interface with the debugger using OpenOCD or the Olimex Programmer software. It is compatible with major IDEs including Eclipse and Rowley Crossworks when configured with the appropriate drivers.

Also Consider

J-Link EDU Mini Segger Microcontroller Systems - A compact, highly-regarded professional debugging solution for educational and non-commercial use with excellent software support.
ARM-USB-OCD-H Olimex LTD - Similar to the Tiny version but includes an integrated RS232 virtual COM port for serial console access.