EmbeddedRelated.com
    Parts   Clocks & Timing  Crystal Oscillators    ASE-10.000MHZ-L-R-T
ASE-10.000MHZ-L-R-T

ASE-10.000MHZ-L-R-T

Abracon LLC
10 MHz XO (Standard) CMOS Oscillator 3.3V Enable/Disable 4-SMD, No Lead
Active
Datasheet Digi-Key Compare Prices

Overview

The ASE-10.000MHZ-L-R-T is a 10 MHz standard crystal oscillator (XO) housed in a compact 3.2mm x 2.5mm surface-mount package. It provides a stable CMOS output and operates on a 3.3V supply, making it a reliable clock source for digital circuits. This component includes an enable/disable function on pin 1 to support power-sensitive designs.

Why Choose This Part

This oscillator offers a tight frequency stability of +/-25ppm within a small 3225 SMD footprint, saving board space without sacrificing precision. Its low-power CMOS output and wide operating temperature range from -40C to +85C make it suitable for diverse environmental conditions.

Applications

Microcontroller Clocking
Providing a stable 10 MHz reference for MCUs and DSPs requiring an external timing source.
Communication Interfaces
Serving as a base clock for low-speed data communication protocols and serial interfaces.
Industrial Control Systems
Timing for PLCs and industrial sensors that operate across a wide -40C to 85C temperature range.
Embedded System Synchronization
General purpose timing for peripheral synchronization in complex multi-IC designs.

Key Specifications

Type XO (Standard)
Output CMOS
Function Enable/Disable
Frequency 10 MHz
Mounting Type Surface Mount
Base Resonator Crystal
Package / Case 4-SMD, No Lead
Size / Dimension 0.126" L x 0.098" W (3.20mm x 2.50mm)
Voltage - Supply 3.3V
Frequency Stability +/-25ppm
Height - Seated (Max) 0.047" (1.20mm)
Operating Temperature -40degC ~ 85degC
Current - Supply (Max) 7mA
Supplier Device Package 4-SMD (3.2x2.5)

Getting Started

Integrate this oscillator by providing a stable 3.3V supply to pin 4 and grounding pin 2. Connect the CMOS output from pin 3 directly to your MCU clock input, and ensure a 0.1uF bypass capacitor is placed close to the VDD pin. Use pin 1 to control the output state; pulling it high enables the clock, while pulling it low enters a high-impedance state for power savings.

Also Consider

ASV-10.000MHZ-EJ-T Abracon LLC - Larger 7.0mm x 5.0mm package that may be easier for manual prototyping or legacy PCB footprints.

Categories

Clocks & Timing > Crystal Oscillators