EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
28days 14hrs 59min 24sec
Learn More →
ASTX-H11-10.000MHZ-T

ASTX-H11-10.000MHZ-T

Abracon LLC
10 MHz TCXO HCMOS Oscillator 3.3V Enable/Disable 4-SMD, No Lead
Active2,271 in stock

Overview

The ASTX-H11-10.000MHZ-T is a 10 MHz Temperature Compensated Crystal Oscillator (TCXO) designed for applications requiring high frequency stability in a compact footprint. It operates from a 3.3V supply and provides a standard HCMOS output with an integrated enable/disable function for power management. With a stability rating of +/-2.5ppm, it offers significantly better timing accuracy than standard clock oscillators over its operating temperature range.

Why Choose This Part

The primary advantage is the +/-2.5ppm frequency stability, which minimizes drift due to temperature fluctuations between -30C and +75C. Its small 3.2mm x 2.5mm SMD package saves PCB real estate, while the 3.3V HCMOS output ensures easy integration with modern microcontrollers and FPGAs.

Applications

Wireless Communication Hubs
Provides a stable reference clock for RF transceivers and baseband processors to ensure reliable data transmission.
GNSS Receivers
Acts as the master clock for GPS/GNSS modules where high frequency stability is required for fast satellite signal acquisition.
Precision Networking Gear
Serves as a timing source for switches and routers to minimize jitter and maintain synchronization across network interfaces.
Test and Measurement Instrumentation
Used in handheld diagnostic tools that require a consistent 10 MHz reference for internal measurement logic.

Key Specifications

Type TCXO
Output HCMOS
Function Enable/Disable
Frequency 10 MHz
Mounting Type Surface Mount
Base Resonator Crystal
Package / Case 4-SMD, No Lead
Size / Dimension 0.126" L x 0.098" W (3.20mm x 2.50mm)
Voltage - Supply 3.3V
Frequency Stability +/-2.5ppm
Height - Seated (Max) 0.043" (1.10mm)
Operating Temperature -30degC ~ 75degC
Current - Supply (Max) 4mA
Supplier Device Package 4-SMD (3.2x2.5)

Getting Started

When designing with this TCXO, place a 0.1uF bypass capacitor as close as possible to the VDD pin to minimize supply noise. Ensure the trace length from the HCMOS output to the load is kept short to prevent ringing and EMI issues. For evaluation, the oscillator can be hand-soldered to a 3225-size breakout board or integrated directly into a prototype PCB for performance characterization.