EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
28days 01hrs 53min 33sec
Learn More →
ASV-24.000MHZ-EJ-T

ASV-24.000MHZ-EJ-T

Abracon LLC
24 MHz XO (Standard) HCMOS Oscillator 3.3V Enable/Disable 4-SMD, No Lead
Active26,715 in stock

Overview

The ASV-24.000MHZ-EJ-T is a 24 MHz crystal clock oscillator (XO) designed for standard HCMOS logic levels. It operates at a nominal 3.3V supply voltage and features an Enable/Disable function on pin 1 to conserve power when the clock signal is not required. This surface-mount device provides a stable frequency source with a tolerance of +/-20ppm over a temperature range of -20C to +70C.

Why Choose This Part

The +/-20ppm frequency stability offers significantly better precision than integrated RC oscillators or standard ceramic resonators. Its 7.0mm x 5.08mm footprint is a widely adopted industry standard, making it easy to source and drop into existing PCB layouts. The dedicated tri-state enable/disable pin allows for system-level power management in battery-sensitive designs.

Applications

Microcontroller Clocking
Provides a high-accuracy external timing source for 8-bit, 16-bit, and 32-bit MCUs requiring a 24 MHz reference.
USB Peripheral Interfaces
Acts as the reference frequency for USB controllers and interface bridges that derive internal bus timings from a 24 MHz base.
Industrial Control Systems
Used in PLC modules and industrial I/O boards where stable timing is critical for synchronous communication.
Networking Equipment
Supports Ethernet PHYs and small-scale switches that utilize 24 MHz for internal clock generation.

Key Specifications

Type XO (Standard)
Output HCMOS
Function Enable/Disable
Frequency 24 MHz
Mounting Type Surface Mount
Base Resonator Crystal
Package / Case 4-SMD, No Lead
Size / Dimension 0.276" L x 0.200" W (7.00mm x 5.08mm)
Voltage - Supply 3.3V
Frequency Stability +/-20ppm
Height - Seated (Max) 0.071" (1.80mm)
Operating Temperature -20degC ~ 70degC
Current - Supply (Max) 15mA
Supplier Device Package 4-SMD (7x5.08)

Getting Started

To use this oscillator, connect 3.3V to VDD and ground the GND pin. The output (HCMOS) should be routed with short, direct traces to the target IC to minimize EMI and signal degradation. Pin 1 (Enable/Disable) must be pulled high for normal operation; if left floating, refer to the datasheet for internal pull-up status to ensure the clock starts correctly.

Also Consider

ASE-24.000MHZ-L-C-T Abracon LLC - Consider this if a smaller 3.2mm x 2.5mm package is required for space-constrained PCB designs.