EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
28days 15hrs 15min 01sec
Learn More →
ASV-27.000MHZ-EJ-T

ASV-27.000MHZ-EJ-T

Abracon LLC
27 MHz XO (Standard) HCMOS Oscillator 3.3V Enable/Disable 4-SMD, No Lead
Active9,754 in stock

Overview

The ASV-27.000MHZ-EJ-T is a 27 MHz crystal-based HCMOS oscillator designed for 3.3V operation. It provides a stable clock source with +/-20ppm frequency stability in a compact 7.0 x 5.08 mm surface-mount package. The device features an enable/disable function to reduce power consumption when the clock signal is not required.

Why Choose This Part

This oscillator offers a tight frequency stability of +/-20ppm over a -20 to 70 degrees Celsius range, ensuring reliable performance in varied environments. Its low maximum supply current of 15mA and integrated tri-state enable/disable pin make it suitable for power-sensitive digital designs.

Applications

Microcontroller Clocking
Provides a high-accuracy external reference for MCUs and DSPs requiring a 27 MHz base frequency.
Video Processing Systems
Supplies the timing reference for standard video interfaces and image processing hardware.
Communication Equipment
Used in networking gear to drive data transmission synchronization with low jitter.

Key Specifications

Type XO (Standard)
Output HCMOS
Function Enable/Disable
Frequency 27 MHz
Mounting Type Surface Mount
Base Resonator Crystal
Package / Case 4-SMD, No Lead
Size / Dimension 0.276" L x 0.200" W (7.00mm x 5.08mm)
Voltage - Supply 3.3V
Frequency Stability +/-20ppm
Height - Seated (Max) 0.071" (1.80mm)
Operating Temperature -20degC ~ 70degC
Current - Supply (Max) 15mA
Supplier Device Package 4-SMD (7x5.08)

Getting Started

To implement this part, provide a stable 3.3V supply to Pin 4 and bypass with a 0.01uF to 0.1uF ceramic capacitor close to the device. Ensure Pin 1 is driven high or left open to enable the output on Pin 3; pulling Pin 1 low will place the output in a high-impedance state.