EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
30days 09hrs 40min 38sec
Learn More →
AT21CS11-STU10-T

MCHPAT21CS11-STU10-T

Microchip Technology
EEPROM Memory IC 1Kbit I2C, Single Wire 125 kHz SOT-23-3
Active809 in stock

Overview

The AT21CS11 is a 1-Kbit Single-Wire EEPROM that communicates over a single I/O pin by parasitically harvesting power from the data line. This 128 x 8 bit non-volatile memory is AEC-Q100 qualified and features a high-speed 125 kHz clock frequency for data-constrained applications.

Why Choose This Part

The device features industry-leading ESD protection of +/-15 kV Air Discharge, ensuring high reliability in harsh environments. Its parasitic power capability eliminates the need for a dedicated VCC trace, significantly simplifying PCB routing and reducing connector pin requirements.

Applications

Consumable Identification
Authenticating and tracking usage data for replaceable components like printer cartridges or medical disposables using only two contact points (SI/O and GND).
Automotive Sensor Modules
Storing calibration constants and serial numbers in space-constrained automotive modules where wiring harness weight and pin count must be minimized.
Cable Assembly Identification
Embedding within connectors to provide electronic labeling and configuration data to the host system over a single wire.

Key Specifications

Technology EEPROM
Memory Size 1Kbit
Memory Type Non-Volatile
Memory Format EEPROM
Mounting Type Surface Mount
Package / Case TO-236-3, SC-59, SOT-23-3
Clock Frequency 125 kHz
Memory Interface I2C, Single Wire
Voltage - Supply 2.7V ~ 4.5V
Memory Organization 128 x 8
Operating Temperature -40degC ~ 85degC (TC)
Supplier Device Package SOT-23-3
Write Cycle Time - Word, Page 5ms

Getting Started

To interface with the AT21CS11, use a microcontroller GPIO with an external pull-up resistor (typically 1k to 10k ohms) to the voltage supply (2.7V to 4.5V). Microchip provides the MCP2221A breakout for USB-to-I2C/Single-Wire evaluation, and software drivers must handle the specific 125 kHz Single-Wire timing requirements.

Also Consider

DS2431 Maxim Integrated / Analog Devices - A well-known 1024-bit 1-Wire EEPROM alternative that operates across a wider voltage range but with a different protocol timing.
DS28E07 Maxim Integrated / Analog Devices - Offers 1024 bits of 1-Wire EEPROM with higher 8kV HBM ESD protection and a standard TO-92 or TSOC package.