EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
27days 20hrs 00min 51sec
Learn More →
AT25SF041B-MAHD-T

RENAT25SF041B-MAHD-T

Renesas Electronics Corporation
FLASH - NOR Memory IC 4Mbit SPI - Quad I/O 108 MHz 8-UDFN (2x3)
Active2,501 in stock

Overview

The AT25SF041B-MAHD-T is a 4Mbit Serial Quad Interface (SQI) Flash memory designed for high-performance systems requiring low power consumption and small physical footprints. It supports Standard SPI, Dual I/O, and Quad I/O modes with clock frequencies up to 108 MHz, enabling Execute-in-Place (XiP) operation directly from Flash. Operating within a 2.5V to 3.6V range, it is optimized for high-volume industrial and consumer applications.

Why Choose This Part

This device offers a high-speed 108 MHz Quad SPI interface that delivers significantly higher throughput than standard serial flash. Its wide voltage range of 2.5V to 3.6V and low standby current of approximately 13.3uA contribute to extended battery life in portable designs. The 8-pad UDFN package provides a minimal 2x3mm footprint, saving critical PCB real estate.

Applications

Execute-in-Place (XiP) Code Storage
Utilizes Quad I/O at 108 MHz to allow microcontrollers to execute code directly from the external flash, reducing the need for internal SRAM.
Industrial IoT Sensors
Provides non-volatile storage for sensor logs and firmware updates in power-constrained wireless nodes.
Consumer Wearables
The ultra-compact 2x3mm UDFN package and low standby current make it ideal for space-constrained battery-powered devices.
Boot Code Storage
Reliable storage for system bootloaders and configuration bitstreams for FPGAs and application processors.

Key Specifications

Technology FLASH - NOR
Memory Size 4Mbit
Memory Type Non-Volatile
Memory Format FLASH
Mounting Type Surface Mount
Package / Case 8-UFDFN Exposed Pad
Clock Frequency 108 MHz
Memory Interface SPI - Quad I/O
Voltage - Supply 2.5V ~ 3.6V
Memory Organization 512K x 8
Operating Temperature -40degC ~ 85degC (TC)
Supplier Device Package 8-UDFN (2x3)
Write Cycle Time - Word, Page 50us, 2.4ms

Getting Started

To integrate this part, configure your MCU SPI peripheral for Mode 0 or Mode 3 and ensure the PCB layout accounts for the thermal pad on the 8-UDFN package. Designers can use standard SPI flash drivers or the Renesas Flash Configurator tool to manage memory maps and instruction sets. For prototyping, ensure your logic levels match the 2.5V to 3.6V supply range to avoid damaging the IC.

Also Consider

W25Q40CLSNIG Winbond Electronics - Offers a similar 4Mbit capacity and Quad SPI performance in a standard SOIC-8 package for easier prototyping.
MX25V4035FM1I Macronix - A low-voltage alternative that supports operation down to 2.3V for tighter power budgets.
S25FL064LABNFI043 IFXInfineon Technologies - Suitable if your design scales up, providing a larger 64Mbit density with similar high-speed Quad SPI characteristics.