EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
28days 15hrs 09min 34sec
Learn More →
AT25XE041D-SHN-T

RENAT25XE041D-SHN-T

Renesas Electronics Corporation
FLASH - NOR Memory IC 4Mbit SPI - Quad I/O 104 MHz 8-SOIC
Active9,333 in stock

Overview

The AT25XE041D-SHN-T is a 4Mbit Ultra-Low Power SPI NOR Flash memory device designed for power-sensitive embedded systems. It supports Single, Dual, and Quad I/O SPI modes with a maximum clock frequency of 104 MHz, operating across a wide voltage range from 1.65V to 3.6V.

Why Choose This Part

This device features an extremely low shutdown current of 7uA and an active read current of 8.5 mA at 104 MHz. Its flexibility is enhanced by support for both volatile and non-volatile status registers, alongside an active status interrupt for efficient system-level power management.

Applications

Firmware Storage
Ideal for storing boot code and application firmware in compact embedded devices.
Data Logging
Suitable for recording sensor data in battery-operated IoT nodes due to its low power consumption.
Wearable Technology
The small 8-SOIC form factor and 7uA shutdown current make it a fit for space-constrained wearable electronics.
Asset Tracking
Provides non-volatile storage for location history and configuration in low-power tracking devices.

Key Specifications

Technology FLASH - NOR
Memory Size 4Mbit
Memory Type Non-Volatile
Memory Format FLASH
Mounting Type Surface Mount
Package / Case 8-SOIC (0.209", 5.30mm Width)
Clock Frequency 104 MHz
Memory Interface SPI - Quad I/O
Voltage - Supply 1.65V ~ 3.6V
Memory Organization 512K x 8
Operating Temperature -40degC ~ 85degC (TC)
Supplier Device Package 8-SOIC
Write Cycle Time - Word, Page 4ms, 30ms

Getting Started

Interface this memory to any microcontroller via the standard SPI bus using the Serial Flash Discoverable Parameters (SFDP) for easy driver configuration. For rapid prototyping, use a standard 8-pin SOIC breakout board and ensure proper decoupling of the 1.65V to 3.6V supply rail.

Also Consider

W25Q40EWSNIG Winbond Electronics - Offers a similar 4Mbit capacity with a slightly higher clock speed of 133 MHz for performance-critical applications.
MX25R4035FM1IL0 Macronix International - An ultra-low power alternative optimized for wide-voltage IoT applications with similar pinout.
SST26WF040B-104I/SN MCHPMicrochip Technology - Provides 4Mbit Quad SPI Flash with high reliability and wide temperature support.