EmbeddedRelated.com
    Parts   Microcontrollers    ATSAMD10D Microcontroller Family    ATSAMD10D    ATSAMD10D13A-MUT
ATSAMD10D13A-MUT

MCHPATSAMD10D13A-MUT

Microchip Technology
ARM® Cortex®-M0+ SAM D10D Microcontroller IC 32-Bit 48MHz 8KB (8K x 8) FLASH 24-QFN (4x4)
Active6,706 in stock
Datasheet Digi-Key Mouser Compare Prices

Overview

The ATSAMD10D13A-MUT is a compact, entry-level 32-bit microcontroller based on the ARM Cortex-M0+ core, operating at frequencies up to 48MHz. This device is designed for space-constrained applications, featuring 8KB of Flash and 4KB of SRAM in a small 4x4mm QFN package. It includes Microchip's Peripheral Touch Controller (PTC) and an Event System for power-efficient peripheral-to-peripheral communication without CPU intervention.

Why Choose This Part

The SAM D10 excels in power efficiency, operating down to 1.62V and featuring SleepWalking technology that allows peripherals to perform tasks while the CPU is in standby. It offers a high degree of peripheral flexibility through its SERCOM modules, which can be configured as I2C, SPI, or USART. The integration of a 10-bit DAC and 12-bit ADC in such a small package provides significant analog capability for its size.

Applications

Capacitive Touch Interfaces
Utilizes the integrated Peripheral Touch Controller to support buttons, sliders, and wheels with high sensitivity and noise tolerance.
Smart Home Sensors
Ideal for battery-powered environmental sensors using SleepWalking technology to wake only on specific peripheral events.
Motor Control Logic
Small footprint and dedicated PWM channels make it suitable for simple BLDC or fan control logic in consumer electronics.
System Supervision
Acts as a low-power co-processor for power sequencing, reset logic, and I/O expansion in larger embedded systems.

Key Specifications

Speed 48MHz
RAM Size 4K x 8
Core Size 32-Bit
Peripherals Brown-out Detect/Reset, DMA, POR, WDT
Connectivity I2C, LINbus, SPI, UART/USART
Mounting Type Surface Mount
Number of I/O 22
Core Processor ARM Cortex-M0+
Package / Case 24-VFQFN Exposed Pad
Data Converters A/D 10x12b; D/A 1x10b
Oscillator Type Internal
Program Memory Size 8KB (8K x 8)
Program Memory Type FLASH
Operating Temperature -40degC ~ 85degC (TA)
Supplier Device Package 24-QFN (4x4)
Voltage - Supply (Vcc/Vdd) 1.62V ~ 3.63V

Getting Started

To begin development, use the Atmel-ICE or SAM-ICE hardware programmers via the SWD interface. Software development is supported by Microchip Studio (formerly Atmel Studio) and the MPLAB X IDE, utilizing the Advanced Software Framework (ASF) or Harmony for peripheral configuration. For rapid prototyping, the SAM D10 Xplained Mini evaluation kit is a recommended hardware platform.

Part of ATSAMD10D Microcontroller family » ATSAMD10D

ATSAMD10D Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number I/O Pins Package ADC/DAC Flash Stock
ATSAMD10D13A-MUT (this part) 22 VFQFN-24 A/D 10x12b; D/A 1x.. 8KB 6,706
ATSAMD10D14A-SSUT 18 SOIC-20 A/D 8x12b; D/A 1x10b 16KB 6,676

Also Consider

ATSAMD11D14A-MUT MCHPMicrochip Technology - Provides a similar pinout and core but adds Full-Speed USB 2.0 device support and larger memory capacity.
ATtiny1616 MCHPMicrochip Technology - An 8-bit alternative that offers similar peripheral sets and touch capabilities for even simpler, lower-cost control tasks.

Categories

Microcontrollers Microcontrollers > ARM Cortex-M0 / M0+ Microcontrollers > Microchip Wearables & Medical > Ultra-Low Power MCUs