EmbeddedRelated.com
ATTINY88-MU

MCHPATTINY88-MU

Microchip Technology
AVR AVR® ATtiny Microcontroller IC 8-Bit 12MHz 8KB (4K x 16) FLASH 32-VQFN (5x5)
NRND1,591 in stock

Overview

The ATTINY88-MU is a high-performance, low-power 8-bit AVR microcontroller featuring 8KB of Flash and 28 I/O lines in a compact 32-VQFN package. Operating at up to 12MHz, it provides a balance of peripheral integration including a 10-bit ADC, SPI, and I2C (TWI) for space-constrained embedded designs.

Why Choose This Part

The ATTINY88-MU offers a high pin-to-size ratio with 28 I/O pins in a 32-pin QFN package. Its advanced RISC architecture executes most instructions in a single clock cycle, enabling efficient processing at 12MHz while maintaining low power consumption in idle and power-down modes.

Applications

System Supervisory Circuits
Utilizing the integrated Brown-out Detect, Power-on Reset, and Watchdog Timer for monitoring system health.
Sensor Interface Nodes
Interfacing with analog sensors via the 10-bit ADC and communicating data over I2C or SPI.
I/O Expansion
Providing 28 general-purpose I/O lines to larger systems while maintaining a small 5x5mm PCB footprint.
Portable Battery-Powered Devices
Leveraging power-down modes with ultra-low current consumption and wide operating voltage.

Key Specifications

Speed 12MHz
RAM Size 512 x 8
Core Size 8-Bit
EEPROM Size 64 x 8
Peripherals Brown-out Detect/Reset, POR, WDT
Connectivity I2C, SPI
Mounting Type Surface Mount
Number of I/O 28
Core Processor AVR
Package / Case 32-VFQFN Exposed Pad
Data Converters A/D 8x10b
Oscillator Type Internal
Program Memory Size 8KB (4K x 16)
Program Memory Type FLASH
Operating Temperature -40degC ~ 85degC (TA)
Supplier Device Package 32-VQFN (5x5)
Voltage - Supply (Vcc/Vdd) 1.8V ~ 5.5V

Getting Started

Develop firmware using Microchip Studio or the AVR-GCC toolchain. Hardware programming can be performed via the SPI interface using an AVR ISP mkII or a similar In-System Programmer. For rapid prototyping, consider the ATTINY88-MMH or compatible breakout boards supported by the Arduino IDE via third-party cores like ATTinyCore.

Part of ATtiny family » ATTINY88

ATTINY88 Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number I/O Pins Package ADC/DAC Stock
ATTINY88-MU (this part) 28 VFQFN-32 A/D 8x10b 1,591
ATTINY88-AU 28 TQFP-32 A/D 8x10b 6,236
ATTINY88-PU 24 DIP-28 A/D 6x10b

Also Consider

ATTINY85-20MU MCHPMicrochip Technology - Smaller 8-pin package for designs needing fewer I/O but higher 20MHz clock speed.
ATMEGA328P-MU MCHPMicrochip Technology - Provides more Flash (32KB) and RAM (2KB) in the same 32-VQFN footprint.